Smart Cooling and Monitoring System for Single Phase Induction Motor
International Journal of Scientific Research in Engineering and Management · 12.03.2026 · 10 (03) · 1-9
DOI: 10.55041/ijsrem57604 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Scientific Research in Engineering and Management, online erschienen am 12.03.2026. Verfasst von Ms. Gayatri B . Langote und 4 weiteren Autor:innen.
Abstract (Originalsprache)
- The Smart Cooling and Monitoring System for a Single Phase Induction Motor is designed to enhance the safety, reliability, and efficiency of motor operation. Single-phase induction motors are widely used in domestic and industrial applications such as water pumps, fans, and small machinery. However, continuous operation of these motors may lead to problems like overheating, excessive vibration, and abnormal electrical conditions, which can reduce motor efficiency and cause failure. This project focuses on real-time monitoring of important electrical parameters such as voltage, current, power, and power factor using an industrial digital multimeter. A Resistance Temperature Detector (RTD) is used to continuously monitor the motor temperature. When the temperature exceeds the preset value, the control circuit activates a relay which turns ON the DC pump and cooling fan. The pump circulates coolant from the reservoir tank through cooling tubes placed around the motor to remove excess heat. Additionally, a vibration sensor is used to detect abnormal vibration caused by mechanical faults such as bearing failure or shaft misalignment. When vibration exceeds the safe limit, a buzzer and LED indicator provide an alert to the operator. This system helps in preventing overheating, reducing maintenance cost, improving motor life, and ensuring safe and efficient operation. It provides a simple, low-cost, and effective solution for motor protection in electrical engineering applications. Key Words: Single Phase Induction Motor, Smart Cooling System, Temperature Sensor, Vibration Sensor, Digital Multimeter, Motor Protection, Monitoring System
Zitieren
APA
Langote, M. G. B., Gavali, S. M., Lokhande, A. T., Rokade, D. P., & Shingade, M. S. A. (2026). Smart Cooling and Monitoring System for Single Phase Induction Motor. International Journal of Scientific Research in Engineering and Management, 10(03), 1-9. https://doi.org/10.55041/ijsrem57604
Vancouver
Langote MGB, Gavali SM, Lokhande AT, Rokade DP, Shingade MSA. Smart Cooling and Monitoring System for Single Phase Induction Motor. International Journal of Scientific Research in Engineering and Management. 2026;10(03):1-9. doi:10.55041/ijsrem57604
BibTeX
@article{Langote2026,
author = {Langote, Ms. Gayatri B . and Gavali, Sakshi Maruti and Lokhande, Anjali Tukaram and Rokade, Divya Premanand and Shingade, Ms. Snehal Anil},
title = {Smart Cooling and Monitoring System for Single Phase Induction Motor},
journal = {International Journal of Scientific Research in Engineering and Management},
year = {2026},
volume = {10},
number = {03},
pages = {1--9},
doi = {10.55041/ijsrem57604}
}
EUVIMED