Effects of Indigenously Sourced Natural and Hybrid Fibres on Fresh and Hardened Properties of Ultra-High-Performance Concrete
International Journal of Scientific Research in Engineering and Management · 07.03.2026 · 10 (03) · 1-9
DOI: 10.55041/ijsrem57284 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Scientific Research in Engineering and Management, online erschienen am 07.03.2026. Verfasst von Rajendra Kumar Srivastava und 2 weiteren Autor:innen.
Abstract (Originalsprache)
The effect of indigenously sourced natural fibres jute, sisal, basalt, and nylon and their binary combinations with high-carbon steel microfibres on the fresh and hardened properties of commercial ultra-high-performance concrete (UHPC) was investigated in the Indian construction context. Six fibre types, added at 1% and 2% by volume, and five binary combinations at a total of 2% fibre content, were evaluated for flowability, compressive strength, flexural performance, toughness, bulk resistivity, and density. Jute (JF) and sisal (SF) fibres, treated with 5% NaOH solution to improve fibre-matrix adhesion, were the primary focus as cost-effective and domestically available alternatives to high-carbon steel. Results indicate that NaOH-treated jute fibres at 2% addition achieved flexural strength of 20.1 MPa, comparable to the 20.8 MPa of the steel control mixture (CS2). Binary combinations of steel-jute (CS1JF1) and steel-sisal (CS1SF1) demonstrated synergistic flexural behaviour, achieving 24.1 MPa and 23.5 MPa respectively, representing increases of 9–16% over single-fibre equivalents at the same total dosage. Sisal fibres significantly reduced flowability due to their high aspect ratio and hydrophilic surface chemistry, analogous to polyethylene fibres in prior studies. Jute-basalt binary mixes exhibited a cost per flexural unit 26% lower than the steel control, making them particularly relevant for bridge repair and pavement overlay applications in Indian infrastructure. Clearly, there are trade-offs among cost, flowability, flexural strength, and compressive strength that can be leveraged through informed fibre selection. Keywords: Ultra-high-performance concrete · Natural fibres · Jute · Sisal · Basalt · Hybrid fibre systems · India · Flexural toughness
Zitieren
APA
Srivastava, R. K., Ojha, D., & Ojha, L. (2026). Effects of Indigenously Sourced Natural and Hybrid Fibres on Fresh and Hardened Properties of Ultra-High-Performance Concrete. International Journal of Scientific Research in Engineering and Management, 10(03), 1-9. https://doi.org/10.55041/ijsrem57284
Vancouver
Srivastava RK, Ojha D, Ojha L. Effects of Indigenously Sourced Natural and Hybrid Fibres on Fresh and Hardened Properties of Ultra-High-Performance Concrete. International Journal of Scientific Research in Engineering and Management. 2026;10(03):1-9. doi:10.55041/ijsrem57284
BibTeX
@article{Srivastava2026,
author = {Srivastava, Rajendra Kumar and Ojha, Devesh and Ojha, Laxmi},
title = {Effects of Indigenously Sourced Natural and Hybrid Fibres on Fresh and Hardened Properties of Ultra-High-Performance Concrete},
journal = {International Journal of Scientific Research in Engineering and Management},
year = {2026},
volume = {10},
number = {03},
pages = {1--9},
doi = {10.55041/ijsrem57284}
}
EUVIMED