EUVIMEDEUVIMED entdecken
Crossref

Multi-Objective Optimization of Cutting Parameters in Turning Operations

RAHUL KUMAR MAHTO, PRAKASH KUMAR MAHTO, AMIT PANDIT, RAHUL DAS, PAWAN KUMAR, AKASH DAS, SAGAR BAURI

International Journal of Creative and Open Research in Engineering and Management · 13.06.2026 · 02 (06) · 1-9

DOI: 10.55041/ijcope.v2i6.153 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Creative and Open Research in Engineering and Management, online erschienen am 13.06.2026. Verfasst von RAHUL KUMAR MAHTO und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Machining through turning is very critical when it comes to the creation of cylindrical components that exhibit superior surface finish and precision. To improve on the performance of machining while at the same time increasing efficiency and reducing costs, the appropriate cutting parameters have to be considered. Multi-objective optimization methods have become increasingly popular in recent times due to the fact that machining performance depends on several objectives that compete with each other, including surface roughness minimization and maximum material removal rate. This paper discusses the use of Taguchi method in combination with Grey Relational Analysis (GRA) as a multi-objective optimization process in turning. Parameters considered for performance include Ra (surface roughness), MRR (material removal rate), and VB (tool wear). The results obtained from experiments were analyzed using Grey Relational Analysis to find out the effect of various parameters on turning operation performance by combining various responses in terms of one Grey Relational Grade (GRG). The significance of the parameters used in the machining process was determined by analysis of variance (ANOVA). Results revealed that the most significant factor affecting performance is cutting speed. An increase in productivity and quality of the machined surface was achieved simultaneously using optimal parameter values.

Zitieren

APA

MAHTO, R. K., MAHTO, P. K., PANDIT, A., DAS, R., KUMAR, P., DAS, A., & BAURI, S. (2026). Multi-Objective Optimization of Cutting Parameters in Turning Operations. International Journal of Creative and Open Research in Engineering and Management, 02(06), 1-9. https://doi.org/10.55041/ijcope.v2i6.153

Vancouver

MAHTO RK, MAHTO PK, PANDIT A, DAS R, KUMAR P, DAS A, et al. Multi-Objective Optimization of Cutting Parameters in Turning Operations. International Journal of Creative and Open Research in Engineering and Management. 2026;02(06):1-9. doi:10.55041/ijcope.v2i6.153

BibTeX
@article{MAHTO2026,
  author = {MAHTO, RAHUL KUMAR and MAHTO, PRAKASH KUMAR and PANDIT, AMIT and DAS, RAHUL and KUMAR, PAWAN and DAS, AKASH and BAURI, SAGAR},
  title = {Multi-Objective Optimization of Cutting Parameters in Turning Operations},
  journal = {International Journal of Creative and Open Research in Engineering and Management},
  year = {2026},
  volume = {02},
  number = {06},
  pages = {1--9},
  doi = {10.55041/ijcope.v2i6.153}
}
Kostenlos starten →