EUVIMEDEUVIMED entdecken
Crossref

Optimization of High-Strength Polypropylene Fiber Reinforced Fly Ash Concrete Using Minitab Statistical Software

P. SANKAR KUMAR REDDY P. SANKAR KUMAR REDDY, A. SHIVA KUMAR A. SHIVA KUMAR

International Journal of Creative and Open Research in Engineering and Management · 01.06.2026 · 02 (05) · 1-15

DOI: 10.55041/ijcope.v2i5.855 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Creative and Open Research in Engineering and Management, online erschienen am 01.06.2026. Verfasst von P. SANKAR KUMAR REDDY P. SANKAR KUMAR REDDY und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rapid expansion of infrastructure has intensified the need for high-performance and sustainable concrete. This study presents an experimental investigation into the mechanical properties of high-strength concrete incorporating fly ash as a partial cement replacement (0% and 40% by weight) and polypropylene (PP) fibers as reinforcement (0% and 1% by volume fraction). Concrete grades M20 to M60 were designed, cast, and tested at 28-day and 56-day curing ages for compressive strength (cube specimens, 150×150×150 mm) and split tensile strength (cylinder specimens, 150×300 mm). Minitab statistical software was used to develop regression models, perform ANOVA, and generate Main Effects and Contour plots for all four response variables: 28-day compressive strength (Comp28), 56-day compressive strength (Comp56), 28-day split tensile strength (Tensile28), and 56-day split tensile strength (Tensile56). Results indicate that concrete grade is the dominant factor for compressive strength, fly ash significantly enhances later-age (56-day) compressive strength through secondary pozzolanic reactions, and PP fiber content exerts the strongest influence on split tensile strength, particularly at 56 days. The regression models achieved R² values exceeding 97%, validating excellent predictive accuracy. The optimized mix M60 grade with 40% fly ash and 1% PP fiber achieved a 56-day compressive strength of 74.8 MPa and demonstrated significantly improved crack resistance and sustainability. Keywords— Fly Ash Concrete; Polypropylene Fibers; Compressive Strength; Split Tensile Strength; Minitab Optimization; ANOVA; Regression Analysis; Sustainable Concrete

Zitieren

APA

REDDY, P. S. K. R. P. S. K., & KUMAR, A. S. K. A. S. (2026). Optimization of High-Strength Polypropylene Fiber Reinforced Fly Ash Concrete Using Minitab Statistical Software. International Journal of Creative and Open Research in Engineering and Management, 02(05), 1-15. https://doi.org/10.55041/ijcope.v2i5.855

Vancouver

REDDY PSKRPSK, KUMAR ASKAS. Optimization of High-Strength Polypropylene Fiber Reinforced Fly Ash Concrete Using Minitab Statistical Software. International Journal of Creative and Open Research in Engineering and Management. 2026;02(05):1-15. doi:10.55041/ijcope.v2i5.855

BibTeX
@article{REDDY2026,
  author = {REDDY, P. SANKAR KUMAR REDDY P. SANKAR KUMAR and KUMAR, A. SHIVA KUMAR A. SHIVA},
  title = {Optimization of High-Strength Polypropylene Fiber Reinforced Fly Ash Concrete Using Minitab Statistical Software},
  journal = {International Journal of Creative and Open Research in Engineering and Management},
  year = {2026},
  volume = {02},
  number = {05},
  pages = {1--15},
  doi = {10.55041/ijcope.v2i5.855}
}
Kostenlos starten →