Spur and Gear Design With Minimized Interference and Improve Contact Ratio
International Journal of Creative and Open Research in Engineering and Management · 13.05.2026 · 02 (05) · 1-9
DOI: 10.55041/ijcope.v2i5.358 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Creative and Open Research in Engineering and Management, online erschienen am 13.05.2026. Verfasst von Pravin S.Gosavi Pravin S.Gosavi und 3 weiteren Autor:innen.
Abstract (Originalsprache)
The design of spur gears plays a important role in efficient power transmission systems, where interference between mating teeth can lead to noise, vibration, wear, and eventual failure. This review paper focuses on various methods used to minimize interference in spur gear design and improve overall performance. Interference mainly occurs when the gear teeth are improperly designed or when the number of teeth is too low, leading to undercutting and weak tooth profiles. To address this issue, several design modifications are discussed, including increasing the pressure angle, using stub teeth, applying profile shifting, and optimizing the number of teeth. Increasing the pressure angle helps in reducing interference by allowing fewer teeth without undercutting and improving tooth strength. Stub teeth reduce the addendum, thereby minimizing the chances of interference at the tooth tip. Profile modification techniques such as tip relief are also effective in reducing contact stresses and improving meshing conditions. Additionally, advancements in computational tools like finite element analysis have enabled better evaluation of stress distribution and tooth behavior under load. The paper reviews existing research and highlights the importance of selecting appropriate design parameters for achieving interference-free operation. Overall, minimizing interference not only enhances gear life but also ensures smooth, quiet, and efficient performance in mechanical systems. Keywords: Spur Gear, Gear Interference, Contact Ratio, Undercutting, Profile Shifting, Pressure Angle, Addendum Modification, Gear Geometry, Involute Profile, Transmission Efficiency, Noise Reduction, Gear Tooth Strength.
Zitieren
APA
S.Gosavi, P. S. P., Narayan, N. S. N. N. S., Deepak, P. S. D. P. S., & Prakash, M. U. P. M. U. (2026). Spur and Gear Design With Minimized Interference and Improve Contact Ratio. International Journal of Creative and Open Research in Engineering and Management, 02(05), 1-9. https://doi.org/10.55041/ijcope.v2i5.358
Vancouver
S.Gosavi PSP, Narayan NSNNS, Deepak PSDPS, Prakash MUPMU. Spur and Gear Design With Minimized Interference and Improve Contact Ratio. International Journal of Creative and Open Research in Engineering and Management. 2026;02(05):1-9. doi:10.55041/ijcope.v2i5.358
BibTeX
@article{SGosavi2026,
author = {S.Gosavi, Pravin S.Gosavi Pravin and Narayan, Navale Shreyash Narayan Navale Shreyash and Deepak, Patil Soham Deepak Patil Soham and Prakash, Mahadik Ujwal Prakash Mahadik Ujwal},
title = {Spur and Gear Design With Minimized Interference and Improve Contact Ratio},
journal = {International Journal of Creative and Open Research in Engineering and Management},
year = {2026},
volume = {02},
number = {05},
pages = {1--9},
doi = {10.55041/ijcope.v2i5.358}
}
EUVIMED