EUVIMEDEUVIMED entdecken
Crossref

A Review of Performance-Based Seismic Evaluation of Core-Wall Tall Buildings with and Without Belt-Truss Systems Considering Different Configuration and Location

Hansora A.G., Kartik Machhi

International Journal of Creative and Open Research in Engineering and Management · 28.04.2026 · 02 (04) · 1-9

DOI: 10.55041/ijcope.v2i4.892 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Creative and Open Research in Engineering and Management, online erschienen am 28.04.2026. Verfasst von Hansora A.G. und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Core-wall systems are widely adopted in tall buildings owing to their efficiency in resisting gravity and lateral loads, architectural adaptability, and construction practicality. However, as structural height and slenderness increase, standalone core-wall systems may exhibit excessive lateral drift, residual deformation, and concentrated seismic demand that undermines serviceability and post-earthquake repairability. Belt-truss and outrigger mechanisms are therefore introduced to engage perimeter columns, enhance overturning resistance, and improve seismic performance across multiple hazard levels. This review synthesizes representative peer-reviewed research on the performance-based seismic evaluation of core-wall tall buildings with and without belt-truss systems, emphasizing configuration type, vertical placement, stiffness distribution, analytical framework, and engineering demand parameters. The literature demonstrates that belt-truss effectiveness is governed by core stiffness, perimeter column stiffness, outrigger rigidity, supplemental damping, soil–structure interaction, and the chosen performance objective. Optimal placement is response-metric dependent: lower-level positioning may reduce base overturning moment, while mid-height or upper-level placement may better moderate story drift or floor acceleration. Nonlinear time-history analysis and fragility-based procedures offer substantially greater reliability than simplified elastic methods. The review identifies critical knowledge gaps and proposes a research agenda to advance resilient, low-damage tall building design.

Zitieren

APA

A.G., H., & Machhi, K. (2026). A Review of Performance-Based Seismic Evaluation of Core-Wall Tall Buildings with and Without Belt-Truss Systems Considering Different Configuration and Location. International Journal of Creative and Open Research in Engineering and Management, 02(04), 1-9. https://doi.org/10.55041/ijcope.v2i4.892

Vancouver

A.G. H, Machhi K. A Review of Performance-Based Seismic Evaluation of Core-Wall Tall Buildings with and Without Belt-Truss Systems Considering Different Configuration and Location. International Journal of Creative and Open Research in Engineering and Management. 2026;02(04):1-9. doi:10.55041/ijcope.v2i4.892

BibTeX
@article{AG2026,
  author = {A.G., Hansora and Machhi, Kartik},
  title = {A Review of Performance-Based Seismic Evaluation of Core-Wall Tall Buildings with and Without Belt-Truss Systems Considering Different Configuration and Location},
  journal = {International Journal of Creative and Open Research in Engineering and Management},
  year = {2026},
  volume = {02},
  number = {04},
  pages = {1--9},
  doi = {10.55041/ijcope.v2i4.892}
}
Kostenlos starten →