EUVIMEDEUVIMED entdecken
Crossref

Comprehensive Review of Effectiveness of Friction Damper in High Rise Building

Karnavat Utsavkumar, Dr. Major C.S. Sanghvi

International Journal of Creative and Open Research in Engineering and Management · 25.04.2026 · 02 (04) · 1-9

DOI: 10.55041/ijcope.v2i4.692 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Creative and Open Research in Engineering and Management, online erschienen am 25.04.2026. Verfasst von Karnavat Utsavkumar und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rapid growth of urbanization and increasing demand for high-rise buildings in seismic-prone regions have made structural safety under dynamic loading a critical concern, as conventional systems such as moment-resisting frames and shear walls, although widely used to resist lateral forces, often lack sufficient energy dissipation capacity, leading to excessive inter-storey drift, large displacements, and potential structural damage during earthquakes; to overcome these limitations, friction dampers have been extensively studied as passive energy dissipation devices, and this review summarizes findings from five key studies focusing on their effectiveness, configuration, placement, optimization, and comparative performance. The studies consistently show that friction dampers significantly enhance seismic performance by reducing base shear, storey displacement, and inter-storey drift compared to conventional systems, while providing additional damping without substantially increasing stiffness or mass, making them an economical and efficient solution. The configuration of dampers is an important factor, with X-braced systems proving more effective than inverted V-braced arrangements in controlling drift and forces, while damper placement is identified as a critical parameter, as distributing dampers along the full height of the structure provides maximum reduction in displacement, drift, and acceleration, particularly in upper storeys, ensuring more uniform energy dissipation. Optimization studies further highlight that proper selection of damper location and friction force, including parameters such as slip load and stiffness, can achieve significant improvements with a minimal number of devices, enhancing both efficiency and cost-effectiveness. Comparative analyses also indicate that friction dampers perform better in higher seismic zones, especially when combined with systems such as friction pendulum bearings, whereas other damping systems may be more suitable for lower seismic regions. Overall, friction dampers offer several advantages, including simplicity, ease of installation, reusability, and cost-effectiveness, making them suitable for both new construction and retrofitting of existing buildings, while also improving force distribution, reducing structural damage, and enhancing post-earthquake functionality and resilience; however, their effectiveness largely depends on proper configuration, placement, and parameter optimization, requiring careful engineering design, and thus they are considered a reliable and practical solution for improving the seismic performance of high-rise structures.

Zitieren

APA

Utsavkumar, K., & Sanghvi, D. M. C. (2026). Comprehensive Review of Effectiveness of Friction Damper in High Rise Building. International Journal of Creative and Open Research in Engineering and Management, 02(04), 1-9. https://doi.org/10.55041/ijcope.v2i4.692

Vancouver

Utsavkumar K, Sanghvi DMC. Comprehensive Review of Effectiveness of Friction Damper in High Rise Building. International Journal of Creative and Open Research in Engineering and Management. 2026;02(04):1-9. doi:10.55041/ijcope.v2i4.692

BibTeX
@article{Utsavkumar2026,
  author = {Utsavkumar, Karnavat and Sanghvi, Dr. Major C.S.},
  title = {Comprehensive Review of Effectiveness of Friction Damper in High Rise Building},
  journal = {International Journal of Creative and Open Research in Engineering and Management},
  year = {2026},
  volume = {02},
  number = {04},
  pages = {1--9},
  doi = {10.55041/ijcope.v2i4.692}
}
Kostenlos starten →