Design and Implementation of Arduino-Based Automatic Load Sharing System for Distribution Transformers with Real-Time Monitoring
International Journal of Creative and Open Research in Engineering and Management · 01.05.2026 · 02 (04) · 1-4
DOI: 10.55041/ijcope.v2i4.1005 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Creative and Open Research in Engineering and Management, online erschienen am 01.05.2026. Verfasst von Reeta Humane Reeta Humane und 6 weiteren Autor:innen.
Abstract (Originalsprache)
Distribution transformers often fail due to constant overloading. This is a major cause of unexpected power outages in rural feeders and small industrial setups. The proposed project presents a cost-effective prototype that uses a micro-controller to automatically balance the load between two step-down transformers. It also provides live current readings on an LCD display. The Arduino Uno R3 board serves as the decision-making unit, continuously monitoring the current load and comparing it to a set value. If the current through the primary transformer exceeds its rated capacity, a relay-controlled switching mechanism connects the secondary transformer in parallel. This allows the two transformers to share the total load. If the total load exceeds the safe rating, the overload is disconnected from the circuit to protect the winding. The prototype was tested on a 24 V, 3 A laboratory-scale prototype and was found to operate within a few milliseconds, maintain the load within the ratings, and accurately display the overload incidents on a screen. The proposed design can be used as an entry-level smart distribution control technique and can be enhanced with IoT/GSM modules for remote monitoring and controlling. Index Terms—Distribution Transformer, Automatic Load Sharing, Parallel Operation, Arduino Uno, Current Sens-ing, Overload Protection, Real-time Monitoring. Index Terms—Distribution Transformer, Automatic Load Sharing, Parallel Operation, Arduino Uno, Current Sensing, Overload Protection, Real-time Monitoring.
Zitieren
APA
Humane, R. H. R., Longadge, K. L. K., Patil, S. P. S., Girhe, G. G. G., Wasnik, N. W. N., Ghorpade, P. G. P., & Kalambe, N. K. N. (2026). Design and Implementation of Arduino-Based Automatic Load Sharing System for Distribution Transformers with Real-Time Monitoring. International Journal of Creative and Open Research in Engineering and Management, 02(04), 1-4. https://doi.org/10.55041/ijcope.v2i4.1005
Vancouver
Humane RHR, Longadge KLK, Patil SPS, Girhe GGG, Wasnik NWN, Ghorpade PGP, et al. Design and Implementation of Arduino-Based Automatic Load Sharing System for Distribution Transformers with Real-Time Monitoring. International Journal of Creative and Open Research in Engineering and Management. 2026;02(04):1-4. doi:10.55041/ijcope.v2i4.1005
BibTeX
@article{Humane2026,
author = {Humane, Reeta Humane Reeta and Longadge, Kaushik Longadge Kaushik and Patil, Shreyash Patil Shreyash and Girhe, Gunvant Girhe Gunvant and Wasnik, Nayan Wasnik Nayan and Ghorpade, Piyush Ghorpade Piyush and Kalambe, Nirbhay Kalambe Nirbhay},
title = {Design and Implementation of Arduino-Based Automatic Load Sharing System for Distribution Transformers with Real-Time Monitoring},
journal = {International Journal of Creative and Open Research in Engineering and Management},
year = {2026},
volume = {02},
number = {04},
pages = {1--4},
doi = {10.55041/ijcope.v2i4.1005}
}
EUVIMED