EUVIMEDEUVIMED entdecken
Crossref

The Empirical Equations for Estimating Spanwise Loading Distribution on a Straight-Trapezoidal Wing Planform Formulated by using Data Generated from Lifting-Line Theory and Least Squares Approximation Method

Tosaporn Soontornpasatch

Engineering and Technology Horizons · 10.06.2026 · 43 (2)

DOI: 10.55003/eth.430204 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering and Technology Horizons, online erschienen am 10.06.2026. Verfasst von Tosaporn Soontornpasatch.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this study was to design and develop a pneumatically controlled seed sowing machine for seedling trays in order to reduce labor requirements and improve planting efficiency. The system integrates a pneumatic actuation mechanism with a control system developed using FluidSIM 4.2. The experimental setup utilized seedling trays with dimensions of 34 × 54 cm, while the prototype machine measured 50 × 90 × 60 cm. Five types of seeds—melon, lettuce, kale, chili, and tomato were tested using three nozzle diameters (2.6 mm, 1.34 mm, and 0.83 mm), with planting conditions ranging from one to four seeds per hole. The results indicate that nozzle size significantly affects planting accuracy depending on seed characteristics. Larger and elongated seeds (melon) achieved the highest accuracy with a 2.6 mm nozzle, whereas small and round seeds (kale and lettuce) performed best with a 1.34 mm nozzle. For small and lightweight seeds (chili and tomato), the 0.83 mm nozzle yielded the highest accuracy due to improved suction concentration and stability. Overall, the system achieved a planting accuracy of 96% across 300 experimental trials, with an error rate of 4%. In terms of operational efficiency, the proposed machine can complete seed sowing for a 50-hole tray within approximately 1 minute, compared to approximately 15 minutes required for manual operation. These results demonstrate that the developed system provides a cost-effective and efficient alternative to conventional manual seed planting methods.

Zitieren

APA

Soontornpasatch, T. (2026). The Empirical Equations for Estimating Spanwise Loading Distribution on a Straight-Trapezoidal Wing Planform Formulated by using Data Generated from Lifting-Line Theory and Least Squares Approximation Method. Engineering and Technology Horizons, 43(2). https://doi.org/10.55003/eth.430204

Vancouver

Soontornpasatch T. The Empirical Equations for Estimating Spanwise Loading Distribution on a Straight-Trapezoidal Wing Planform Formulated by using Data Generated from Lifting-Line Theory and Least Squares Approximation Method. Engineering and Technology Horizons. 2026;43(2). doi:10.55003/eth.430204

BibTeX
@article{Soontornpasatch2026,
  author = {Soontornpasatch, Tosaporn},
  title = {The Empirical Equations for Estimating Spanwise Loading Distribution on a Straight-Trapezoidal Wing Planform Formulated by using Data Generated from Lifting-Line Theory and Least Squares Approximation Method},
  journal = {Engineering and Technology Horizons},
  year = {2026},
  volume = {43},
  number = {2},
  doi = {10.55003/eth.430204}
}
Kostenlos starten →