EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Synthesis of Methylcellulose from Industrial Hemp: Optimization of Mercerization and Methylation Conditions with Dimethyl Sulfate

Sergey Kostryukov, Shamil Fayzrakhmanov, Aleksey Burtasov, Valentin Kalyazin

CURRENT APPLIED SCIENCE AND TECHNOLOGY · 20.11.2026 · e0272315

DOI: 10.55003/cast.2026.272315 ↗

Kurz gefasst

Fachartikel in der Zeitschrift CURRENT APPLIED SCIENCE AND TECHNOLOGY, online erschienen am 20.11.2026. Verfasst von Sergey Kostryukov und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Methylcellulose (MC) is widely used in various industries, including construction, pharmaceuticals, and biomedicine. The aim of this work was to develop a laboratory method for the synthesis of MC from cellulose obtained from industrial hemp – a renewable and economical raw material. Cellulose was isolated by two methods: organosolv (method A) and sodium hydroxide‑ammonia (method B). MC synthesis was carried out in a heterogeneous medium (toluene–isopropanol mixture) using dimethyl sulfate as a methylating agent. The effects of NaOH concentration during mercerization (20-50 %) and the molar ratio of cellulose to dimethyl sulfate (from 1:1.28 to 1:3) on the degree of substitution (DS) and water solubility of the product were studied. The obtained samples were characterized by IR spectroscopy, 1H and 13C NMR, as well as gas-liquid chromatography (GLC) after cleavage with in situ generated hydroiodic acid. An increase in the amount of dimethyl sulfate was shown to regularly increase DS and the yield of the water‑soluble fraction. A non‑monotonic dependence of DS on alkali concentration was found, i.e. minimum values were observed at 20 and 30 % NaOH, while the maximum was at 50% NaOH. The highest degree of substitution (DS = 1.38-1.70) and methoxy group content (23.6-28.4 %) were achieved using organosolv cellulose, mercerization with 50 % NaOH, and a cellulose : dimethyl sulfate molar ratio of 1:2.5-3.0. A convenient GLC method for the determination of methoxy groups was developed, giving results that correlated well with NMR data. The obtained results allow us to recommend industrial hemp as a promising raw material for the synthesis of water‑soluble cellulose ethers.

Zitieren

APA

Kostryukov, S., Fayzrakhmanov, S., Burtasov, A., & Kalyazin, V. (2026). Synthesis of Methylcellulose from Industrial Hemp: Optimization of Mercerization and Methylation Conditions with Dimethyl Sulfate. CURRENT APPLIED SCIENCE AND TECHNOLOGY, e0272315. https://doi.org/10.55003/cast.2026.272315

Vancouver

Kostryukov S, Fayzrakhmanov S, Burtasov A, Kalyazin V. Synthesis of Methylcellulose from Industrial Hemp: Optimization of Mercerization and Methylation Conditions with Dimethyl Sulfate. CURRENT APPLIED SCIENCE AND TECHNOLOGY. 2026:e0272315. doi:10.55003/cast.2026.272315

BibTeX
@article{Kostryukov2026,
  author = {Kostryukov, Sergey and Fayzrakhmanov, Shamil and Burtasov, Aleksey and Kalyazin, Valentin},
  title = {Synthesis of Methylcellulose from Industrial Hemp: Optimization of Mercerization and Methylation Conditions with Dimethyl Sulfate},
  journal = {CURRENT APPLIED SCIENCE AND TECHNOLOGY},
  year = {2026},
  pages = {e0272315},
  doi = {10.55003/cast.2026.272315}
}
Kostenlos starten →