EUVIMEDEUVIMED entdecken
Crossref

Comparative Evaluation of The Microhardness of Artificial Teeth of Various Composition

Nazire Esra Özer

Kapadokya Üniversitesi · 2023

DOI: 10.54995/asc.3.2.2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Kapadokya Üniversitesi, 2023. Verfasst von Nazire Esra Özer.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Statement of the problem: To help physicians choose the right materials for treatment planning, it is necessary to investigate to the mechanical and physical characteristics of denture teeth made with new technology.

Objective

This study aims to investigate the comparative microhardness of artificial teeth with different composition. Materials & Methods: A total of 96 specimens (n=32) were prepared using three different types of artificial teeth (conventional polymethylmethacrylate, , and nanohybrid composite) (Group CA - Conventional PMMA, Group IS - Isosite Group DCL - double cross-linked acrylic). Surface hardness values were determined using a microhardness tester (Shimadzu HMV Corporation, Tokyo, Japan) with a load of 500 g and a dwell time of 15 seconds. Three indentations were obtained for each sample and the Vickers Hardness Number (VHN) was calculated and averaged. One-way analysis of variance (ANOVA) and post-hoc Tukey HSD tests were used for statistical analysis. The statistical significance level of the data was taken as α=0.05.

Results

The highest microhardness values were observed in Group IS (53.96 ± 8.5 VHN) and the lowest in Group CA (53.55±9.9 VHN). However, no statistically significant difference was found between the groups (P>0.05).

Conclusions

For the durability and function of prosthetic rehabilitations performed by clinicians, the choice of artificial teeth should not be ignored, based on cost and accessibility criteria.

Zitieren

APA

Özer, N. E. (2023). Comparative Evaluation of The Microhardness of Artificial Teeth of Various Composition. Kapadokya Üniversitesi. https://doi.org/10.54995/asc.3.2.2

Vancouver

Özer NE. Comparative Evaluation of The Microhardness of Artificial Teeth of Various Composition. Kapadokya Üniversitesi. 2023. doi:10.54995/asc.3.2.2

BibTeX
@article{zer2023,
  author = {Özer, Nazire Esra},
  title = {Comparative Evaluation of The Microhardness of Artificial Teeth of Various Composition},
  journal = {Kapadokya Üniversitesi},
  year = {2023},
  doi = {10.54995/asc.3.2.2}
}
Kostenlos starten →