EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Direct Absorption Solar Collector: An Experimental Investigation of Al2O3-H2O Nanofluid over the Flat Plate at Different Tilt Angles, and Mass-Flow Rates

Lalit Jyani, Shivangi Sharma, Kailash Chaudhary, Kamlesh Purohit

New Energy Exploitation and Application · 2024

DOI: 10.54963/neea.v3i1.214 ↗

Kurz gefasst

Fachartikel in der Zeitschrift New Energy Exploitation and Application, 2024. Verfasst von Lalit Jyani und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The escalating demand for solar thermal energy, coupled with the current inefficiencies in existing systems, underscores the critical need for innovative advancements in thermal storage solar collectors. The efficiency of solar collectors relies not solely on design effectiveness but also on the thermophysical properties, such as heat capacity and thermal conductivity, inherent in the working fluid. This study investigates a novel solar collector with a gross area of 0.36 m2, operating on the principle of direct absorption. Experimental investigations were done at various tilt angles (15°, 20°, and 30°) with respect to the horizontal, considering different flow rates and nanofluid settlement within the base fluids. The use of Al2O3 nanoparticles into the base fluid as water, exhibits significant positive effects on the thermophysical properties of the nanofluids, with a volume concentration of 0.003%. The efficiency of the solar collector was calculated across three mass flow rates (0.5, 1, and 1.33 L/min) at each tilt angle. Notably, the study reveals that the efficiency peaks at a 15° tilt due to an optimal flow configuration for maximum energy harvest across all three mass flow rates. Increasing the mass flow rate yields efficiency increments for all tilt angles (15°, 20°, and 30°), with 1 L/min emerging as the optimal mass-flow rate in most cases. This research not only addresses the immediate need for improved solar thermal technologies but also aligns with global sustainability goals, contributing to the IEA Net Zero Emissions initiative and supporting UN Sustainable Development Goals 7, 9, and 11. The paper also includes a critical literature review on the use of nanofluids in solar thermal collectors to improve thermo-physical properties and enhance solar efficiency. Additionally, the key findings regarding the influence and tilt angle on solar efficiency are discussed.

Zitieren

APA

Jyani, L., Sharma, S., Chaudhary, K., & Purohit, K. (2024). Direct Absorption Solar Collector: An Experimental Investigation of Al2O3-H2O Nanofluid over the Flat Plate at Different Tilt Angles, and Mass-Flow Rates. New Energy Exploitation and Application. https://doi.org/10.54963/neea.v3i1.214

Vancouver

Jyani L, Sharma S, Chaudhary K, Purohit K. Direct Absorption Solar Collector: An Experimental Investigation of Al2O3-H2O Nanofluid over the Flat Plate at Different Tilt Angles, and Mass-Flow Rates. New Energy Exploitation and Application. 2024. doi:10.54963/neea.v3i1.214

BibTeX
@article{Jyani2024,
  author = {Jyani, Lalit and Sharma, Shivangi and Chaudhary, Kailash and Purohit, Kamlesh},
  title = {Direct Absorption Solar Collector: An Experimental Investigation of Al2O3-H2O Nanofluid over the Flat Plate at Different Tilt Angles, and Mass-Flow Rates},
  journal = {New Energy Exploitation and Application},
  year = {2024},
  doi = {10.54963/neea.v3i1.214}
}
Kostenlos starten →