EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Analysis of the effectiveness of surfactant application in enhanced oil recovery methods

Birzhan G. Rakhmet

Kazakhstan journal for oil & gas industry · 30.06.2026 · 8 (2) · 27-35

DOI: 10.54859/kjogi108999 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Kazakhstan journal for oil & gas industry, online erschienen am 30.06.2026. Verfasst von Birzhan G. Rakhmet. Die Arbeit nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Conventional waterflooding typically achieves an oil recovery factor of no more than 35–40%, leaving a significant portion of the oil in place within the pore space of the reservoir rock, where it is retained by capillary forces. The application of chemical enhanced oil recovery methods, particularly Alkaline–Surfactant–Polymer (ASP) flooding, is a promising approach for high-viscosity oil reservoirs, where conventional waterflooding is characterized by a highly unfavorable mobility ratio between the displacing fluid and the oil.

Aim

Systematic laboratory evaluation of ASP flooding effectiveness for the productive horizons of Field X (Western Kazakhstan),, based on real core samples from borehole K-2524, with the development development of recommendations for optimising the chemical slug formulation. Materials and Methods: The study employed methods such as incoming quality control of commercial surfactant samples, compatibility testing at a specified reservoir temperature over a defined period, phase behaviour screening of lauryl sulfate / sodium hydroxide systems with crude oil from two horizons, and filtration experiments conducted using the PLS-200 petrophysical laboratory setup.

Results

ASP flooding with 0.02% sodium dodecyl sulfate (SDS) + 0.6–0.8% NaOH + 2,500–3,000 ppm hydrolyzed polyacrylamide (HPAM) achieved an incremental oil recovery factor of 19.0–19.2% for the Cretaceous chalk horizon (total RF of 68.5–68.9%) and 17.7% for the Jurassic horizon at 3,000 ppm HPAM. The HPAM concentration is a critical design parameter: deviation from the required mobility ratio condition (M ≤ 1.0) reduces the incremental oil recovery by nearly half.

Conclusion

ASP flooding demonstrated high efficiency for both horizons when the formulation parameters were properly optimized. The optimal formulation (0.02% SDS + 0.8% NaOH + 2,500 ppm HPAM) is recommended as providing the best balance between incremental oil recovery factor and reagent cost.

Zitieren

APA

Rakhmet, B. G. (2026). Analysis of the effectiveness of surfactant application in enhanced oil recovery methods. Kazakhstan journal for oil & gas industry, 8(2), 27-35. https://doi.org/10.54859/kjogi108999

Vancouver

Rakhmet BG. Analysis of the effectiveness of surfactant application in enhanced oil recovery methods. Kazakhstan journal for oil & gas industry. 2026;8(2):27-35. doi:10.54859/kjogi108999

BibTeX
@article{Rakhmet2026,
  author = {Rakhmet, Birzhan G.},
  title = {Analysis of the effectiveness of surfactant application in enhanced oil recovery methods},
  journal = {Kazakhstan journal for oil & gas industry},
  year = {2026},
  volume = {8},
  number = {2},
  pages = {27--35},
  doi = {10.54859/kjogi108999}
}
Kostenlos starten →