EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

PEMODELAN TRANSFORMASI DIRECT QUADRATUR (D-Q) PADA KENDALI KECEPATAN MOTOR INDUKSI 3 FASA DENGAN METODE VECTOR CONTROL

Rizana Fauzi, Muhammad Aristo Indrajaya, Dody Chandra Kumara

Foristek · 2021

DOI: 10.54757/fs.v10i2.40 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Foristek, 2021. Verfasst von Rizana Fauzi und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The application of the 3 phase induction motor is increasingly developing, this has led to research on speed regulation of 3 phase induction motors is also growing, because the use in industry and especially in hybrid vehicles is increasingly being developed. However, there are several disadvantages of an induction motor, one of which is the non-linear parameter characteristics, especially the rotor resistance, which varies in value for different operating conditions, so that it cannot maintain its speed constantly when a load changes. Therefore, to get constant speed and better system performance against load changes, a controller is needed. This study aims to implement the vector control method in the 3 phase induction motor speed control application in following the reference speed. In vector modeling, the 3 phase parameters (ia, ib and ic) will be transformed into direct quadrature (dq) parameters where in this parameter the setting of the field size and torque can be adjusted separately. In the implementation results, it can be seen that the use of vector control can be used as an approach in regulating the speed of an induction motor.

Zitieren

APA

Fauzi, R., Indrajaya, M. A., & Kumara, D. C. (2021). PEMODELAN TRANSFORMASI DIRECT QUADRATUR (D-Q) PADA KENDALI KECEPATAN MOTOR INDUKSI 3 FASA DENGAN METODE VECTOR CONTROL. Foristek. https://doi.org/10.54757/fs.v10i2.40

Vancouver

Fauzi R, Indrajaya MA, Kumara DC. PEMODELAN TRANSFORMASI DIRECT QUADRATUR (D-Q) PADA KENDALI KECEPATAN MOTOR INDUKSI 3 FASA DENGAN METODE VECTOR CONTROL. Foristek. 2021. doi:10.54757/fs.v10i2.40

BibTeX
@article{Fauzi2021,
  author = {Fauzi, Rizana and Indrajaya, Muhammad Aristo and Kumara, Dody Chandra},
  title = {PEMODELAN TRANSFORMASI DIRECT QUADRATUR (D-Q) PADA KENDALI KECEPATAN MOTOR INDUKSI 3 FASA DENGAN METODE VECTOR CONTROL},
  journal = {Foristek},
  year = {2021},
  doi = {10.54757/fs.v10i2.40}
}
Kostenlos starten →