EUVIMEDEUVIMED entdecken
Crossref

Microstructural and mechanical properties of Al2O3 reinforced Al7010 matrix composites, fabricated by stir casting

Ameeq Farooq, Fauzia Wahid, Muhammad Arslan Hafeez, Tayyaba Anum

Journal of the Pakistan Institute of Chemical Engineers · 2021

DOI: 10.54693/piche.04917 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the Pakistan Institute of Chemical Engineers, 2021. Verfasst von Ameeq Farooq und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The microstructural and mechanical properties of alumina reinforced Al7010 matrix composites, fabricated by stir casting, were investigated by varying size and volume fractions of alumina particles. The optical microscope, micro Vickers hardness tester, tensile tester, and impact testers were used to evaluate the microstructure and mechanical properties of produced alumina reinforced Al7010 matrix composites. Results show that the alumina reinforced Al7010 matrix composites, incorporating lower volume fractions of alumina particles, exhibited much better morphological and mechanical properties than composites with higher volume fractions. The composite with 14% alumina particles of size 15 µm exhibited uniform dispersion of alumina particles in the Al7010 matrix with superior interfacial bonding and negligible agglomeration of alumina particles and excellent morphological properties. On the other hand, the composite, having 21% alumina particles of size 1 µm demonstrated very poor morphological properties and intensive agglomeration of alumina particles. Similarly, the maximum values of Rm (349 MPa) and ƐT (3.41%) were also offered by composite, incorporating 14% Al2O3 particles of size 15 µm attributed to the uniform dispersion and negligible agglomeration of alumina particles throughout the matrix. The composite with 21% alumina particles of size 1 µm offered the minimum values of Rm (172 MPa) and ƐT (1.69%) due to the presence of intensive agglomeration of alumina particles. The superior impact toughness (11.4 J) and the overall optimum combination of morphological and mechanical properties were offered by the composite with 14% alumina particles of size 15 µm.

Zitieren

APA

Farooq, A., Wahid, F., Hafeez, M. A., & Anum, T. (2021). Microstructural and mechanical properties of Al2O3 reinforced Al7010 matrix composites, fabricated by stir casting. Journal of the Pakistan Institute of Chemical Engineers. https://doi.org/10.54693/piche.04917

Vancouver

Farooq A, Wahid F, Hafeez MA, Anum T. Microstructural and mechanical properties of Al2O3 reinforced Al7010 matrix composites, fabricated by stir casting. Journal of the Pakistan Institute of Chemical Engineers. 2021. doi:10.54693/piche.04917

BibTeX
@article{Farooq2021,
  author = {Farooq, Ameeq and Wahid, Fauzia and Hafeez, Muhammad Arslan and Anum, Tayyaba},
  title = {Microstructural and mechanical properties of Al2O3 reinforced Al7010 matrix composites, fabricated by stir casting},
  journal = {Journal of the Pakistan Institute of Chemical Engineers},
  year = {2021},
  doi = {10.54693/piche.04917}
}
Kostenlos starten →