EUVIMEDEUVIMED entdecken
Crossref

Electrochemical Characterization of AlTiN Coating on Stainless Steel Substrate for Biomedical Implant

Muhammad Umar Manzoor, Faraz Hussain, Hafsa Zafar, Hamna Sajjad, Asma Salman, Fahad Riaz, Ameeq Farooq, Tahir Ahmad, Muhammad Kamran

Journal of the Pakistan Institute of Chemical Engineers · 2021

DOI: 10.54693/piche.04822 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the Pakistan Institute of Chemical Engineers, 2021. Verfasst von Muhammad Umar Manzoor und 8 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Physical Vapor Deposition technology is an established technique to deposit metallic and ceramic coatings on different metallic substrates. Lateral Arc Rotating Cathode (LARC) technology has an added advantages of better mechanical uniform coating, consistent erosion of the electrodes and greater degree of ionization. LARC technology was used to deposit AlTiN coating on stainless steel SS 316L samples. The electrochemical behavior of the coating and the substrate was investigated using Electrochemical Impedance Spectroscopy (EIS) technique. Ringer Lectate solution was used as a simulated body fluid at 35 ± 2oC. The coating and substrate were characterized by Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDX) and Surface Profilometry. The Scanning Electron Microscopy with Energy Dispersive X-ray Spectroscopy analysis revealed a consistent coating as a whole. The surface profilometry showed lower surface roughness after the coating. The Electrochemical Impedance Spectroscopy tests indicated that corrosion resistance of the coated sample was better, than the uncoated substrate in the electrolyte solution for short duration (one day) and behaved like cathodically protected coating and showed more resistivity. However, the Electrochemical Impedance Spectroscopy results varied because of the penetration of chlorite ions through the porosity in th coating and reaction with the coating material after the prolonged insertion.

Zitieren

APA

Manzoor, M. U., Hussain, F., Zafar, H., Sajjad, H., Salman, A., Riaz, F., Farooq, A., Ahmad, T., & Kamran, M. (2021). Electrochemical Characterization of AlTiN Coating on Stainless Steel Substrate for Biomedical Implant. Journal of the Pakistan Institute of Chemical Engineers. https://doi.org/10.54693/piche.04822

Vancouver

Manzoor MU, Hussain F, Zafar H, Sajjad H, Salman A, Riaz F, et al. Electrochemical Characterization of AlTiN Coating on Stainless Steel Substrate for Biomedical Implant. Journal of the Pakistan Institute of Chemical Engineers. 2021. doi:10.54693/piche.04822

BibTeX
@article{Manzoor2021,
  author = {Manzoor, Muhammad Umar and Hussain, Faraz and Zafar, Hafsa and Sajjad, Hamna and Salman, Asma and Riaz, Fahad and Farooq, Ameeq and Ahmad, Tahir and Kamran, Muhammad},
  title = {Electrochemical Characterization of AlTiN Coating on Stainless Steel Substrate for Biomedical Implant},
  journal = {Journal of the Pakistan Institute of Chemical Engineers},
  year = {2021},
  doi = {10.54693/piche.04822}
}
Kostenlos starten →