Fabrication of Microcrystalline Cellulose From Waste Paper as Potential Eco-Friendly Cellulose Aerogel Material
Journal of Technical Education Science · 12.05.2026
DOI: 10.54644/jte.2026.2000 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Technical Education Science, online erschienen am 12.05.2026. Verfasst von Thi Kim Hien Pham und 4 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Waste paper was a raw material with a relatively high cellulose content, ranging from 40–80%. It was also an abundant feedstock that had already undergone partial processing to remove lignin, which provided advantages for cellulose extraction. In this study, microcrystalline cellulose was successfully extracted through a chemical route using a NaOH/H₂O₂ reaction system followed by hydrolysis with H₂SO₄. Scanning electron microscopy (SEM) results revealed that, after chemical treatment, the surface of the obtained microcrystalline cellulose became smooth, and no impurities were observed. Fourier-transform infrared spectroscopy (FTIR) spectra showed absorption peaks at wavenumbers corresponding to the vibrational modes of O–H, C–H, and C–O bonds, which were characteristic of the chemical structure of cellulose. X-ray diffraction (XRD) patterns of the microcrystalline cellulose exhibited higher diffraction intensity compared to those of the raw material. Thermogravimetric analysis (TGA) demonstrated that the extracted microcrystalline cellulose possessed greater thermal stability than the original waste paper. Finally, Brunauer–Emmett–Teller (BET) analysis showed that the cellulose aerogel fabricated from microcrystalline cellulose had a specific surface area of 0.711 m²/g, a BJH pore volume of 0.003424 cm³/g, and an average pore diameter of 34.99 nm. These results demonstrate that microcrystalline cellulose obtained from waste paper is a promising raw material for the fabrication of environmentally friendly cellulose aerogels applicable in diverse fields.
Zitieren
APA
Pham, T. K. H., Huynh, N. M. D., Bui, P. D., Nguyen, N. A. T., & Nguyen, C. T. (2026). Fabrication of Microcrystalline Cellulose From Waste Paper as Potential Eco-Friendly Cellulose Aerogel Material. Journal of Technical Education Science. https://doi.org/10.54644/jte.2026.2000
Vancouver
Pham TKH, Huynh NMD, Bui PD, Nguyen NAT, Nguyen CT. Fabrication of Microcrystalline Cellulose From Waste Paper as Potential Eco-Friendly Cellulose Aerogel Material. Journal of Technical Education Science. 2026. doi:10.54644/jte.2026.2000
BibTeX
@article{Pham2026,
author = {Pham, Thi Kim Hien and Huynh, Ngoc My Duyen and Bui, Phuong Dong and Nguyen, Ngoc Anh Thu and Nguyen, Chi Thanh},
title = {Fabrication of Microcrystalline Cellulose From Waste Paper as Potential Eco-Friendly Cellulose Aerogel Material},
journal = {Journal of Technical Education Science},
year = {2026},
doi = {10.54644/jte.2026.2000}
}
EUVIMED