Structural resistance of orthodontic mini-screws inserted for extra-alveolar anchorage
Acta Odontológica Latinoamericana · 2021-04 · 34 (1) · 27-34
DOI: 10.54589/aol.34/1/027 ↗Kurz gefasst
Fachartikel in der Zeitschrift Acta Odontológica Latinoamericana, 2021-04. Verfasst von Carlos Am Vieira und 5 weiteren Autor:innen. Beteiligte Einrichtung: Universidade Federal de Uberlândia, Faculdade de Odontologia, Programa de Pós-Graduação em Odontologia, Uberlândia, Brasil. carlosamvieira@hotmail.co…. Hauptthemen laut MEDLINE: Dental Implants, Orthodontic Anchorage Procedures. Die Arbeit wurde bisher 6-mal zitiert (Crossref).
Abstract (Originalsprache)
The risk of fracture or strain in mini-screws is higher if diameter, length, type of alloy or insertion angle is selected inappropriately. The aims of this study were to test the structural resistance of two types of orthodontic mini-screws –one made of stainless steel and another of titanium– from an international brand and to evaluate the efficacy of two other titanium miniscrews of Brazilian origin, during an extra-alveolar anchorage procedure. The mini-screws analyzed were: Bomei stainless steel and Bomei titanium / Taiwan, Morelli titanium and Neodent titanium/ Brazil. Experiments were conducted on pig mandibles to simulate the process of extra-alveolar anchorage. Two insertion processes were used: Direct at 30º, and Indirect, starting at 60º and ending at 30º with gradual continuous movement. Strain was evaluated using Optical and Scanning Electron Microscopy. Data were evaluated using Kruskal-Wallis non-parametric statistical analysis and post hoc Tamhane test. Significant statistical differences in strain were observed among the mini-screws used in the extra-alveolar insertions, both for the direct and indirect procedures. In the indirect insertion tests, both stainless steel and titanium mini-screws suffered deformation, showing that angling can be an important factor in mini-screw failure rates. The change in angle during the insertion movement increased deformation rates independently of alloy type, increasing the risk of failure. These results could help orthodontists in choosing mini-screws for extra-alveolar anchorage, which can be performed with direct or indirect insertion. In vivo studies should be conducted to confirm the findings of this study.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Universidade Federal de Uberlândia, Faculdade de Odontologia, Programa de Pós-Graduação em Odontologia, Uberlândia, Brasil. carlosamvieira@hotmail.com.
- Universidade Federal de Uberlândia, Faculdade de Odontologia, Programa de Pós-Graduação em Odontologia, Uberlândia, Brasil.
- Universidade Federal de Uberlândia, Faculdade de Medicina, Departamento de Saúde Coletiva, Uberlândia, Brasil.
- Universidade Federal de Uberlândia, Faculdade de Engenharia Mecânica, Departamento de Biomecânica, Uberlândia, Brasil.
Zitieren
APA
Vieira, C. A., Pires, F., Hattori, W. T., de Araújo, C. A., Garcia-Junior, M. A., & Zanetta-Barbosa, D. (2021). Structural resistance of orthodontic mini-screws inserted for extra-alveolar anchorage. Acta Odontológica Latinoamericana, 34(1), 27-34. https://doi.org/10.54589/aol.34/1/027
Vancouver
Vieira CA, Pires F, Hattori WT, de Araújo CA, Garcia-Junior MA, Zanetta-Barbosa D. Structural resistance of orthodontic mini-screws inserted for extra-alveolar anchorage. Acta Odontológica Latinoamericana. 2021;34(1):27-34. doi:10.54589/aol.34/1/027
BibTeX
@article{Vieira2021,
author = {Vieira, Carlos Am and Pires, Francyelle and Hattori, Wallisen T and de Araújo, Cleudmar A and Garcia-Junior, Marcelo A and Zanetta-Barbosa, Darceny},
title = {Structural resistance of orthodontic mini-screws inserted for extra-alveolar anchorage},
journal = {Acta Odontológica Latinoamericana},
year = {2021},
volume = {34},
number = {1},
pages = {27--34},
doi = {10.54589/aol.34/1/027}
}
EUVIMED