EUVIMEDEUVIMED entdecken
Crossref

Effect of Temperature Treatment on the Mechanical Properties of Bioplastics Edible Film Seaweed Gracilaria SPP

Ade Saepullah, Agri Kala Yosu, Tjokorda Gde Tirta Nindhia

International Journal of Recent Development in Engineering and Technology · 22.04.2026 · 15 (4) · 1043-1051

DOI: 10.54380/ijrdet0426_160 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Recent Development in Engineering and Technology, online erschienen am 22.04.2026. Verfasst von Ade Saepullah und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the effect of temperature treatment on the mechanical properties of seaweed-based edible film Gracilaria Spp. Combined with glycerol as a plasticizer and chitosan as a structural strengthener. The film was prepared from 10 g of seaweed, 80 mL of aqua, 5 mL of vinegar, 1 mL of glycerin, and 10 mL of chitosan, then tested under two treatment conditions. room temperature and high temperature (80-100°C). Mechanical properties testing was carried out using ASTM D638-V standards including tensile strength, elongation at break, and elastic modulus. The results showed a very large increase in all mechanical parameters due to high temperature treatment. The average tensile strength increased from 0.142 N/mm² (room temperature) to 26.542 N/mm² (temperature 80-100°C), representing an increase of approximately 187 times. The average modulus of elasticity also increased from 0.417 to 45.766 N/mm², while the average strain increased from 0.372 to 0.667. The hightemperature treatment led to the formation of tighter cross-bonds between polymer chains as well as substantial homogenization of the film matrix. All formulations in the high-temperature treatment met the minimum tensile strength standard of JIS Z 1707 (0.392 MPa), while the average elongation value (66.7%) was close to the minimum limit of 70%. These findings confirm the potential of Gracilaria spp.-based bioplastics as a sustainable eco-friendly packaging alternative.

Zitieren

APA

Saepullah, A., Yosu, A. K., & Nindhia, T. G. T. (2026). Effect of Temperature Treatment on the Mechanical Properties of Bioplastics Edible Film Seaweed Gracilaria SPP. International Journal of Recent Development in Engineering and Technology, 15(4), 1043-1051. https://doi.org/10.54380/ijrdet0426_160

Vancouver

Saepullah A, Yosu AK, Nindhia TGT. Effect of Temperature Treatment on the Mechanical Properties of Bioplastics Edible Film Seaweed Gracilaria SPP. International Journal of Recent Development in Engineering and Technology. 2026;15(4):1043-1051. doi:10.54380/ijrdet0426_160

BibTeX
@article{Saepullah2026,
  author = {Saepullah, Ade and Yosu, Agri Kala and Nindhia, Tjokorda Gde Tirta},
  title = {Effect of Temperature Treatment on the Mechanical Properties of Bioplastics Edible Film Seaweed Gracilaria SPP},
  journal = {International Journal of Recent Development in Engineering and Technology},
  year = {2026},
  volume = {15},
  number = {4},
  pages = {1043--1051},
  doi = {10.54380/ijrdet0426_160}
}
Kostenlos starten →