Computer Aided Design (CAD) Based Approach for Ship Hull Geometry Modelling from Offset Data Using B-Spline Curves
Applied Science and Technology on Naval Engineering · 14.08.2026 · 4 (2) · 1-11
DOI: 10.54378/astne.v4i2v2.01 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Science and Technology on Naval Engineering, online erschienen am 14.08.2026. Verfasst von Ardi Nugoho Yulianto und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Indonesia, as an archipelagic country, requires the development of efficient and independent ship design technologies. This study aims to develop a B-spline-based computer aided design (CAD) program for modelling ship hull geometry from offset data and calculating basic hydrostatic parameters. The offset data are defined as fit points at each station and processed to determine the corresponding control points for generating B-spline section curves. The resulting station curves are then arranged along the longitudinal direction to form the hull geometry. Hydrostatic calculations are performed by evaluating the station curves, determining the submerged sections at a specified draft, calculating the submerged sectional areas, and integrating them along the ship length. The calculated parameters include submerged volume, displacement, Longitudinal Center of Buoyancy (LCB), Length of Waterline (LWL), and Waterplane Area (WPA). The developed program is validated using a ship model template from commercial software by comparing both hull geometry and hydrostatic results. The validation shows deviations under 0.2% for the simple curve test and under 0.35% for the hydrostatic parameters of the selected hull model. These results indicate that the developed program has the potential to serve as a local CAD alternative for preliminary hull modeling and basic hydrostatic calculations.
Zitieren
APA
Yulianto, A. N., Pasaribu, S. L. A., Winarko, R. R., Ahmad, R. F., Adietya, B. A., Utama, D., Efendi, A. M., & Satoto, S. W. (2026). Computer Aided Design (CAD) Based Approach for Ship Hull Geometry Modelling from Offset Data Using B-Spline Curves. Applied Science and Technology on Naval Engineering, 4(2), 1-11. https://doi.org/10.54378/astne.v4i2v2.01
Vancouver
Yulianto AN, Pasaribu SLA, Winarko RR, Ahmad RF, Adietya BA, Utama D, et al. Computer Aided Design (CAD) Based Approach for Ship Hull Geometry Modelling from Offset Data Using B-Spline Curves. Applied Science and Technology on Naval Engineering. 2026;4(2):1-11. doi:10.54378/astne.v4i2v2.01
BibTeX
@article{Yulianto2026,
author = {Yulianto, Ardi Nugoho and Pasaribu, Sheely Leony Artha and Winarko, Raybonda Reinaldi and Ahmad, Roisul Fadli and Adietya, Berlian Arswendo and Utama, Danu and Efendi, Ardiansyah Musa and Satoto, Sapto Wiratno},
title = {Computer Aided Design (CAD) Based Approach for Ship Hull Geometry Modelling from Offset Data Using B-Spline Curves},
journal = {Applied Science and Technology on Naval Engineering},
year = {2026},
volume = {4},
number = {2},
pages = {1--11},
doi = {10.54378/astne.v4i2v2.01}
}
EUVIMED