Comparative Evaluation of the Mechanical Properties of Brick Raw Materials Fired at Different High Temperatures: A Case Study of Erzincan and Tokat Provinces
Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi · 30.07.2026 · 13 (1) · 1-13
DOI: 10.54365/adyumbd.1904572 ↗Kurz gefasst
Fachartikel in der Zeitschrift Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi, online erschienen am 30.07.2026. Verfasst von Ahmet İhsan Turan und 1 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben.
Abstract (Originalsprache)
This study investigates the mechanical properties and damage mechanisms of clay soils used in brick production in the provinces of Erzincan and Erbaa (Tokat) under elevated temperatures. Cylindrical specimens (38 × 76 mm) were prepared from raw materials obtained from both regions and tested under three thermal conditions: unfired, fired at 600 °C, and fired at 900 °C. The firing processes were conducted in a solid-fuel Hoffmann kiln to simulate realistic field production conditions. Based on the load-displacement curves obtained from the experiments, stiffness, energy absorption capacity, and maximum load values were determined. Results indicate that unfired specimens exhibit low load-carrying capacity due to their porous structure. Increasing temperature enhanced the sintering effect and improved mechanical performance. Tokat specimens showed higher strength and stiffness with a more brittle response, whereas Erzincan specimens exhibited comparatively more ductile behavior.
Zitieren
APA
Turan, A. İ., & Çelik, A. (2026). Comparative Evaluation of the Mechanical Properties of Brick Raw Materials Fired at Different High Temperatures: A Case Study of Erzincan and Tokat Provinces. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi, 13(1), 1-13. https://doi.org/10.54365/adyumbd.1904572
Vancouver
Turan Aİ, Çelik A. Comparative Evaluation of the Mechanical Properties of Brick Raw Materials Fired at Different High Temperatures: A Case Study of Erzincan and Tokat Provinces. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi. 2026;13(1):1-13. doi:10.54365/adyumbd.1904572
BibTeX
@article{Turan2026,
author = {Turan, Ahmet İhsan and Çelik, Alper},
title = {Comparative Evaluation of the Mechanical Properties of Brick Raw Materials Fired at Different High Temperatures: A Case Study of Erzincan and Tokat Provinces},
journal = {Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi},
year = {2026},
volume = {13},
number = {1},
pages = {1--13},
doi = {10.54365/adyumbd.1904572}
}
EUVIMED