EUVIMEDEUVIMED entdecken
Crossref

COMPARISON OF PHYSICAL AND MECHANICAL PROPERTIES OF COLD BONDED AND SINTERED LIGHTWEIGHT ARTIFICIAL AGGREGATES

Nihat ATMACA, Mais IBRAHİM, Adem ATMACA

Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi · 2021

DOI: 10.54365/adyumbd.1013239 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi, 2021. Verfasst von Nihat ATMACA und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 14 Literaturangaben. Gefördert von: GAZİANTEP ÜNİVERSİTESİ.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Artificial aggregate production which has the highest volume ingredient in concrete has gained great importance in recent years. The fundemental cause for this is to reduce harmful environmental impacts. In addition, artificial aggregates are tried to be used to improve some important features of concrete. In the present study, the physical and mechanical properties of two types of artificial aggregates produced by cold bonding and sintering methods were compared. For this purpose, artificial aggregates pelletized and sintered at different temperatures were produced by using fly ash at different percentages. Dry density, specific density, water absorption and crushing strength tests were carried out to investigate the physical and mechanical properties of the produced artificial aggregates. The results showed that the bulk density and density values of sintered Fly ash artificial aggregates have a trend of rising but the water absorption values have a decreasing trend. Moreover the highest crushed strength value was observed in samples sintered at 900 oC.

Förderung

  • GAZİANTEP ÜNİVERSİTESİ

Zitieren

APA

ATMACA, N., IBRAHİM, M., & ATMACA, A. (2021). COMPARISON OF PHYSICAL AND MECHANICAL PROPERTIES OF COLD BONDED AND SINTERED LIGHTWEIGHT ARTIFICIAL AGGREGATES. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi. https://doi.org/10.54365/adyumbd.1013239

Vancouver

ATMACA N, IBRAHİM M, ATMACA A. COMPARISON OF PHYSICAL AND MECHANICAL PROPERTIES OF COLD BONDED AND SINTERED LIGHTWEIGHT ARTIFICIAL AGGREGATES. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi. 2021. doi:10.54365/adyumbd.1013239

BibTeX
@article{ATMACA2021,
  author = {ATMACA, Nihat and IBRAHİM, Mais and ATMACA, Adem},
  title = {COMPARISON OF PHYSICAL AND MECHANICAL PROPERTIES OF COLD BONDED AND SINTERED LIGHTWEIGHT ARTIFICIAL AGGREGATES},
  journal = {Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi},
  year = {2021},
  doi = {10.54365/adyumbd.1013239}
}
Kostenlos starten →