Experimental PIV Analysis and Numerical Simulation of Flow in Solar Spherical Systems for Enhanced Power Generation
Highlights of Sustainability · 21.05.2026 · 5 (2) · 360-378
DOI: 10.54175/hsustain5020024 ↗Kurz gefasst
Fachartikel in der Zeitschrift Highlights of Sustainability, online erschienen am 21.05.2026. Verfasst von Hassan Abdulmouti und 1 weiteren Autor:innen. Die Arbeit nennt 79 Literaturangaben.
Abstract (Originalsprache)
This study presents a comparative analysis of Particle Image Velocimetry (PIV) measurements and simulations to investigate the internal flow dynamics and thermal performance of acrylic solar spheres filled with working fluids (water) for concentrated solar power generation. The transparent acrylic sphere acts as a passive optical concentrator, focusing the Direct Normal Irradiance (DNI) from the Sun onto a multi-junction solar cell positioned beneath it. As a result, such systems can achieve higher electrical power output than conventional photovoltaic panels due to the concentration of solar radiation. This research aims to analyze the internal flow characteristics within the solar sphere and examine how temperature variations influence fluid velocity and affect power generation efficiency and overall system performance. Simulations were conducted under an incident DNI of 850 W/m2, with experimental validation performed using PIV under controlled laboratory conditions. The findings demonstrated that velocity and temperature had a substantial impact on the flow structure. Results show that the maximum surface temperature reached 64.6 °C at the upper region of the sphere, while the average fluid temperature ranged between 53.6–56.3 °C. The maximum velocity magnitude within the sphere was approximately 3.5 mm/s, primarily occurring near the upper boundary due to thermally induced convection. Experimental PIV results demonstrated close agreement (<7% deviation) with simulation predictions. Furthermore, thinner spheres exhibited improved optical focusing and heat transfer characteristics, enhancing convective motion and overall photovoltaic conversion. At 35 °C, a 10 cm-diameter sphere with 3 mm wall thickness achieved the highest output power and efficiency, with a power increase of ~18% and an efficiency improvement of ~12% compared to the 8 mm-thick configuration. The results emphasize the coupled role of thermal and flow behavior in optimizing solar sphere design for enhanced power generation.
Zitieren
APA
Abdulmouti, H., & Hajjawi, M. (2026). Experimental PIV Analysis and Numerical Simulation of Flow in Solar Spherical Systems for Enhanced Power Generation. Highlights of Sustainability, 5(2), 360-378. https://doi.org/10.54175/hsustain5020024
Vancouver
Abdulmouti H, Hajjawi M. Experimental PIV Analysis and Numerical Simulation of Flow in Solar Spherical Systems for Enhanced Power Generation. Highlights of Sustainability. 2026;5(2):360-378. doi:10.54175/hsustain5020024
BibTeX
@article{Abdulmouti2026,
author = {Abdulmouti, Hassan and Hajjawi, Muhanad},
title = {Experimental PIV Analysis and Numerical Simulation of Flow in Solar Spherical Systems for Enhanced Power Generation},
journal = {Highlights of Sustainability},
year = {2026},
volume = {5},
number = {2},
pages = {360--378},
doi = {10.54175/hsustain5020024}
}
EUVIMED