EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermoluminescence and Kinetic Parameters of a Synthesized Copper-doped LTB Phosphor using High Temperature Solid State Technique

A. E. Ayodele, A. M. Arogunjo, S. S. Oluyamo, O. I. Olusola

IPS Journal of Engineering and Technology · 2026

DOI: 10.54117/pakbqt15 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IPS Journal of Engineering and Technology, 2026. Verfasst von A. E. Ayodele und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium tetraborate is a known thermoluminescent materials with tissue equivalent properties and a promising potential of being used in radiation dosimetry. But, the intensity of the signal in most cases is not suitable for practical purposes. Hence, by way of optimization, this present study prepared lithium tetraborate phosphor and doped with various concentrations of copper dopant (0 – 0.5) % using the high temperature solid state technique and sintering in a programmable Muffle Furnace. The samples were characterized using XRD, FTIR, DTA and SEM/EDX. The SEM, XRD and FTIR confirmed the morphological and structural composition of the phosphors. The EDX confirmed the elemental composition of the samples and DTA established the thermal stability of the crystals. The samples were irradiated with 137Cs at a dose of 7 mGy/h and read in a TLD reader at a constant heating rate of 5 K/s to determine its thermoluminescence and kinetic parameters. The results showed a single broad peak at a temperature of about 855 K and 858 K with no fading peaks. First-order kinetics was obtained for 0.1 % LTB:Cu and 0.5 % LTB:Cu, with the trap depth of 4.4 eV and 2.8 eV, respectively. A symmetry factor of 0.29 and 0.24 was obtained, respectively for 0.1 % copper doped phosphors and 0.5 % copper doped phosphor.

Zitieren

APA

Ayodele, A. E., Arogunjo, A. M., Oluyamo, S. S., & Olusola, O. I. (2026). Thermoluminescence and Kinetic Parameters of a Synthesized Copper-doped LTB Phosphor using High Temperature Solid State Technique. IPS Journal of Engineering and Technology. https://doi.org/10.54117/pakbqt15

Vancouver

Ayodele AE, Arogunjo AM, Oluyamo SS, Olusola OI. Thermoluminescence and Kinetic Parameters of a Synthesized Copper-doped LTB Phosphor using High Temperature Solid State Technique. IPS Journal of Engineering and Technology. 2026. doi:10.54117/pakbqt15

BibTeX
@article{Ayodele2026,
  author = {Ayodele, A. E. and Arogunjo, A. M. and Oluyamo, S. S. and Olusola, O. I.},
  title = {Thermoluminescence and Kinetic Parameters of a Synthesized Copper-doped LTB Phosphor using High Temperature Solid State Technique},
  journal = {IPS Journal of Engineering and Technology},
  year = {2026},
  doi = {10.54117/pakbqt15}
}
Kostenlos starten →