EUVIMEDEUVIMED entdecken
Crossref

Experimental Assessment of Leakage, Housing Temperature, Vibration and Wear in a Centrifugal-Pump Mechanical Seal under Variable Operating Conditions

Lucky Olatunde Odejimi, Emeke Achojakimoni Okotie, Olorunleke Aregbe

International Journal of Global Trends and Research · 14.11.2026 · 3 (3) · 320-331

DOI: 10.54117/fa673656 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Global Trends and Research, online erschienen am 14.11.2026. Verfasst von Lucky Olatunde Odejimi und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mechanical seals are critical components of centrifugal pumps because they prevent leakage along the rotating shaft while operating under simultaneous hydraulic, thermal and tribological loading. Progressive degradation can result in increased leakage, temperature rise, elevated vibration and eventual pump failure. This paper reports an experimental investigation of a single mechanical seal installed on a laboratory centrifugal pump under variable rotational speed, discharge pressure and flow conditions. A 2.2 kW single-stage centrifugal pump with a 25 mm shaft and a carbon/ceramic mechanical seal was used. Seal leakage, seal-housing temperature, pump vibration, pressure and flow rate were measured at controlled operating conditions spanning 1,500–2,900 rpm and 1.0–3.0 bar (15 conditions × 3 replicates = 45 observations). Seal wear was evaluated through mass measurements and visual examination after a cumulative 100 h operating programme. Leakage rate increased from 0.42 ± 0.01 mL/min at 1,500 rpm and 1.0 bar to 1.70 ± 0.04 mL/min at 2,900 rpm and 3.0 bar. Seal-housing temperature rose correspondingly from 34.0 ± 0.4 °C to 71.0 ± 0.4 °C, while vibration velocity increased from 1.40 ± 0.04 mm/s to 3.30 ± 0.06 mm/s. After 100 h the carbon face lost 12.4 mg. A two-way ANOVA confirmed highly significant main effects of rotational speed and discharge pressure, and a significant speed × pressure interaction, on leakage rate (all p < 0.001). A strong linear association was observed between seal-housing temperature and leakage (R² = 0.966). The results support improved mechanical-seal selection, operating practice and condition-based maintenance strategies, subject to the limitations of a single seal design, clean water as the working fluid and a short laboratory test duration.

Zitieren

APA

Odejimi, L. O., Okotie, E. A., & Aregbe, O. (2026). Experimental Assessment of Leakage, Housing Temperature, Vibration and Wear in a Centrifugal-Pump Mechanical Seal under Variable Operating Conditions. International Journal of Global Trends and Research, 3(3), 320-331. https://doi.org/10.54117/fa673656

Vancouver

Odejimi LO, Okotie EA, Aregbe O. Experimental Assessment of Leakage, Housing Temperature, Vibration and Wear in a Centrifugal-Pump Mechanical Seal under Variable Operating Conditions. International Journal of Global Trends and Research. 2026;3(3):320-331. doi:10.54117/fa673656

BibTeX
@article{Odejimi2026,
  author = {Odejimi, Lucky Olatunde and Okotie, Emeke Achojakimoni and Aregbe, Olorunleke},
  title = {Experimental Assessment of Leakage, Housing Temperature, Vibration and Wear in a Centrifugal-Pump Mechanical Seal under Variable Operating Conditions},
  journal = {International Journal of Global Trends and Research},
  year = {2026},
  volume = {3},
  number = {3},
  pages = {320--331},
  doi = {10.54117/fa673656}
}
Kostenlos starten →