Anthropometric–Furniture Mismatch among Engineering Students and Preliminary Ergonomic Design Specifications for Engineering Drawing Workstations at Igbinedion University, Nigeria
IPS Journal of Engineering and Technology · 2026
DOI: 10.54117/b5m8b451 ↗Kurz gefasst
Fachartikel in der Zeitschrift IPS Journal of Engineering and Technology, 2026. Verfasst von Gbenga Joseph Ajayi und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study assessed anthropometric characteristics and dimensional compatibility between engineering students and existing engineering-drawing furniture at Igbinedion University, Okada, Nigeria. The analysis used 120 anthropometric records, six chair variants, and one drawing-table configuration. The participant-level work-surface requirement was calculated as popliteal height plus a 2 cm footwear allowance plus sitting elbow height. Popliteal height ranged from 35.9 to 51.7 cm (mean 44.15, SD 2.71); the calculated work-surface requirement had a P5–P95 envelope of 66.40–79.12 cm. Under the stated criteria, seat-height compatibility ranged from 28.33% to 53.33%, seat-depth compatibility from 68.33% to 92.50%, and seat-width compatibility from 82.50% to 93.33% across the six chairs. The 81 cm table had 0% compatibility under the fixed-seat chair–table criterion, while measured knee and thigh clearances accommodated all 120 records. Preliminary anthropometric targets are approximately 41.99–50.21 cm adjustable seat height, 30.85–47.41 cm seat-depth envelope, minimum seat width of 43.41 cm before justified allowances, work-surface height of 66.40–79.12 cm, knee clearance of at least 55.91 cm, and thigh clearance of at least 24.41 cm. The dataset does not contain seated shoulder height, so a backrest-height target could not be derived. These are preliminary targets, not validated specifications; prototype and user testing are required.
Zitieren
APA
Ajayi, G. J., Erameh, A. A., & Odejimi, L. O. (2026). Anthropometric–Furniture Mismatch among Engineering Students and Preliminary Ergonomic Design Specifications for Engineering Drawing Workstations at Igbinedion University, Nigeria. IPS Journal of Engineering and Technology. https://doi.org/10.54117/b5m8b451
Vancouver
Ajayi GJ, Erameh AA, Odejimi LO. Anthropometric–Furniture Mismatch among Engineering Students and Preliminary Ergonomic Design Specifications for Engineering Drawing Workstations at Igbinedion University, Nigeria. IPS Journal of Engineering and Technology. 2026. doi:10.54117/b5m8b451
BibTeX
@article{Ajayi2026,
author = {Ajayi, Gbenga Joseph and Erameh, Andrew Amagbor and Odejimi, Lucky Olatunde},
title = {Anthropometric–Furniture Mismatch among Engineering Students and Preliminary Ergonomic Design Specifications for Engineering Drawing Workstations at Igbinedion University, Nigeria},
journal = {IPS Journal of Engineering and Technology},
year = {2026},
doi = {10.54117/b5m8b451}
}
EUVIMED