A Four-Timescale Continuous-Time Model with Sliding-Window Calibration for State-of-Charge Prediction on Battery-Powered Devices
Academic Journal of Applied Sciences · 20.11.2026 · 4 (1) · 1-5
DOI: 10.54097/dwfm4n93 ↗Kurz gefasst
Fachartikel in der Zeitschrift Academic Journal of Applied Sciences, online erschienen am 20.11.2026. Verfasst von Haiyang Yu. Die Arbeit nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Predicting how long a battery-powered device will run before its state of charge (SOC) reaches a usable limit is a forward problem in continuous time: the quantity of interest is a first-passage time of a state driven by inputs whose timescales differ by about seven orders of magnitude, from processor load within seconds to capacity loss over the service life. A model resolved on one timescale misplaces the others. This paper develops a continuous-time model in which one state equation is closed by four terms, each owning a band: a discharge-power decomposition into baseline, user and environmental parts, an hourly integration whose power coefficients are recalibrated on a sliding window, an aging coefficient on the day-to-month band, and an Arrhenius–solid-electrolyte-interphase capacity trajectory beyond a month. Sixteen public datasets supply the coefficients and the usage statistics, and nine of them carry the parameters the model needs and serve as validation runs. Across the nine runs the mean absolute error is 6.0786 and the root mean square error is 7.0300 in SOC percentage points. The predicted mean falls below the observed mean in every run, and across the five tabulated runs the gap is 4.20 to 5.68 points, with that offset accounting for 97% to 99% of the mean absolute error in four of them, which places the dominant error in the calibration rather than in the structure. At full charge the predicted endurance runs from 3.0 h under extreme usage to 11.9 h in low-power mode, a factor of 4.0 that a user can move within by changing settings alone.
Zitieren
APA
Yu, H. (2026). A Four-Timescale Continuous-Time Model with Sliding-Window Calibration for State-of-Charge Prediction on Battery-Powered Devices. Academic Journal of Applied Sciences, 4(1), 1-5. https://doi.org/10.54097/dwfm4n93
Vancouver
Yu H. A Four-Timescale Continuous-Time Model with Sliding-Window Calibration for State-of-Charge Prediction on Battery-Powered Devices. Academic Journal of Applied Sciences. 2026;4(1):1-5. doi:10.54097/dwfm4n93
BibTeX
@article{Yu2026,
author = {Yu, Haiyang},
title = {A Four-Timescale Continuous-Time Model with Sliding-Window Calibration for State-of-Charge Prediction on Battery-Powered Devices},
journal = {Academic Journal of Applied Sciences},
year = {2026},
volume = {4},
number = {1},
pages = {1--5},
doi = {10.54097/dwfm4n93}
}
EUVIMED