Sustainability versus Safety in 3D-Printed Tactile Aids for Blind Children: A Cross-Domain Review of Recycled Plastic Degradation, Chemical Risks, and Design Constraints, with an Illustrative Case
Highlights in Science, Engineering and Technology · 21.08.2026 · 165 · 51-61
DOI: 10.54097/4scrgy44 ↗Kurz gefasst
Fachartikel in der Zeitschrift Highlights in Science, Engineering and Technology, online erschienen am 21.08.2026. Verfasst von Yuhao Sun. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Themen: Kinderkrankenpflege
Abstract (Originalsprache)
Desktop fused-deposition-modeling (FDM) 3D printing has made it possible to produce low-cost, customizable tactile educational aids for children with visual impairment, and the environmental cost of single-use virgin filament has encouraged the adoption of recycled and closed-loop ("distributed") filament. Three bodies of research bear on whether this substitution is safe for blind children: the engineering literature on how recycled polymers degrade, the environmental-health literature on the chemical emissions and migration of 3D-printed plastics, and the assistive-technology literature on how tactile aids are designed and used. These literatures rarely cite one another. This narrative review brings them together and reports three findings. First, recycled poly(lactic acid) (PLA), glycol-modified poly(ethylene terephthalate) (PETG), and acrylonitrile-butadiene-styrene (ABS) all lose measurable mechanical performance within only two to five reprocessing cycles, by polymer-specific mechanisms. Second, the chemical-safety profile differs sharply between polymers, with PLA the most favorable and ABS the least, and recycling can introduce non-intentionally added substances not present in virgin material. Third, tactile aids for blind children involve unusually high and prolonged skin and oral contact, placing them in the most demanding tier of toy-safety regulation. An illustrative case — a tactile sliding-block (Klotski) puzzle — shows that the same millimeter-scale raised features that carry the tactile information are simultaneously the most fragile and the highest-contact surfaces. Recycled filament should be treated as conditionally, not automatically, appropriate for this application, and material- and design-level constraints are set out together with priorities for future testing.
Zitieren
APA
Sun, Y. (2026). Sustainability versus Safety in 3D-Printed Tactile Aids for Blind Children: A Cross-Domain Review of Recycled Plastic Degradation, Chemical Risks, and Design Constraints, with an Illustrative Case. Highlights in Science, Engineering and Technology, 165, 51-61. https://doi.org/10.54097/4scrgy44
Vancouver
Sun Y. Sustainability versus Safety in 3D-Printed Tactile Aids for Blind Children: A Cross-Domain Review of Recycled Plastic Degradation, Chemical Risks, and Design Constraints, with an Illustrative Case. Highlights in Science, Engineering and Technology. 2026;165:51-61. doi:10.54097/4scrgy44
BibTeX
@article{Sun2026,
author = {Sun, Yuhao},
title = {Sustainability versus Safety in 3D-Printed Tactile Aids for Blind Children: A Cross-Domain Review of Recycled Plastic Degradation, Chemical Risks, and Design Constraints, with an Illustrative Case},
journal = {Highlights in Science, Engineering and Technology},
year = {2026},
volume = {165},
pages = {51--61},
doi = {10.54097/4scrgy44}
}
EUVIMED