EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evolution of Bonding Strength of WC-10Co-4Cr Coatings during Grinding Based on a Voronoi Polycrystalline Model

Tongkai Shi

Academic Journal of Science and Technology · 30.03.2026 · 20 (1) · 184-189

DOI: 10.54097/2412vf41 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Academic Journal of Science and Technology, online erschienen am 30.03.2026. Verfasst von Tongkai Shi. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the degradation mechanism of bonding strength of WC-10Co-4Cr coatings during grinding, a Voronoi polycrystalline model combined with single abrasive grain explicit dynamic simulation and scratch experiments was employed. A coupled abrasive–coating–interface–substrate model was established in ABAQUS, and the effects of grinding depth and speed on stress distribution and load transfer were analyzed under purely mechanical conditions. Results show that increasing grinding depth intensifies stress concentration and promotes subsurface damage and interfacial degradation, leading to a reduction in bonding strength. In contrast, higher grinding speed produces a more uniform stress distribution, suppresses interfacial damage, and enhances bonding strength. The polycrystalline model further reveals that stress localization is governed by grain heterogeneity, with grain boundaries acting as preferential damage initiation sites. These findings provide insight into the relationship between grinding parameters and bonding performance, offering guidance for process optimization of WC-based coatings.

Zitieren

APA

Shi, T. (2026). Evolution of Bonding Strength of WC-10Co-4Cr Coatings during Grinding Based on a Voronoi Polycrystalline Model. Academic Journal of Science and Technology, 20(1), 184-189. https://doi.org/10.54097/2412vf41

Vancouver

Shi T. Evolution of Bonding Strength of WC-10Co-4Cr Coatings during Grinding Based on a Voronoi Polycrystalline Model. Academic Journal of Science and Technology. 2026;20(1):184-189. doi:10.54097/2412vf41

BibTeX
@article{Shi2026,
  author = {Shi, Tongkai},
  title = {Evolution of Bonding Strength of WC-10Co-4Cr Coatings during Grinding Based on a Voronoi Polycrystalline Model},
  journal = {Academic Journal of Science and Technology},
  year = {2026},
  volume = {20},
  number = {1},
  pages = {184--189},
  doi = {10.54097/2412vf41}
}
Kostenlos starten →