EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal-Hydraulic Performance of a Solar Flat Plate Collector Using CO2 under Superheated and Supercritical Regimes

Wasim Ashraf, Maddali Ramgopal, Mahendra V. Reddy

Thermal Science and Applications · 2026

DOI: 10.53941/tsa.2026.100018 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Thermal Science and Applications, 2026. Verfasst von Wasim Ashraf und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a thermal-hydraulic assessment of an indirect solar water heating system employing carbon dioxide (CO2) as the heat-transfer fluid in a flat-plate collector. The work compares superheated and supercritical operating regimes under identical geometric, flow, and standardized outdoor conditions. A distributed one-dimensional MATLAB model is formulated by coupling the Hottel-Whillier energy balance with real-gas CO2 thermophysical properties obtained by integrating REFPROP. The collector tube is discretized axially to capture the strong variations in specific heat, density, viscosity, thermal conductivity, Nusselt number, pressure drop, and local heat transfer coefficient near the critical and pseudo-critical regions. The model is evaluated for inlet temperatures of 300–340 K and operating pressures of 50–100 bar under blue-sky, hazy-sky, and grey-sky Standard Reporting Conditions of ISO 9806:2017. The analysis shows that operating near 80 bar provides the most favorable thermal-hydraulic outcomes. The heat transfer improves due to enhanced real-gas properties, while hydraulic loss and pumping power decrease because of the higher density and lower flow velocity of pressurized CO2. Within the investigated range, supercritical operation improves collector efficiency by approximately 15–20% compared with superheated operation at comparable boundary conditions. The results provide design guidance for CO2-based solar thermal collectors and highlight that high-pressure material selection, sealing, safety, and techno-economic assessment are necessary before practical deployment.

Zitieren

APA

Ashraf, W., Ramgopal, M., & Reddy, M. V. (2026). Thermal-Hydraulic Performance of a Solar Flat Plate Collector Using CO2 under Superheated and Supercritical Regimes. Thermal Science and Applications. https://doi.org/10.53941/tsa.2026.100018

Vancouver

Ashraf W, Ramgopal M, Reddy MV. Thermal-Hydraulic Performance of a Solar Flat Plate Collector Using CO2 under Superheated and Supercritical Regimes. Thermal Science and Applications. 2026. doi:10.53941/tsa.2026.100018

BibTeX
@article{Ashraf2026,
  author = {Ashraf, Wasim and Ramgopal, Maddali and Reddy, Mahendra V.},
  title = {Thermal-Hydraulic Performance of a Solar Flat Plate Collector Using CO2 under Superheated and Supercritical Regimes},
  journal = {Thermal Science and Applications},
  year = {2026},
  doi = {10.53941/tsa.2026.100018}
}
Kostenlos starten →