Electrical Discharge Machining of Composites: A Critical Review of Challenges and Innovations
Journal of Mechanical Engineering and Manufacturing · 2025
DOI: 10.53941/jmem.2025.100005 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Mechanical Engineering and Manufacturing, 2025. Verfasst von André F. V. Pedroso und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Electrical Discharge Machining (EDM) is a critical non-conventional manufacturing technique for shaping electrically conductive materials, especially those with high hardness or complex geometries. Utilising thermal energy generated by controlled electrical discharges, EDM enables precise material removal without mechanical contact. This review systematically examines recent advancements in EDM with a focused lens on composite materials, specifically Metal-Matrix Composites (MMCs), Polymer-Matrix Composites (PMCs), and Ceramic-Matrix Composites (CMCs), which present distinct challenges due to their heterogeneous structure and limited machinability using conventional methods. This study investigates the influence of both electrical and non-electrical parameters on key performance indicators, including Material Removal Rate (MRR), Tool Wear Rate (TWR), and surface integrity. Notably, hybrid approaches such as Powder-Mixed EDM and cryogenic-assisted EDM demonstrate significant potential in enhancing machining performance and extending Tool Life (TL). By synthesising over two decades of research, this review identifies critical trends, technological innovations, and ongoing challenges in the EDM of composites. The findings emphasise the importance of parameter optimisation and novel dielectric modifications in advancing the efficiency, precision, and sustainability of EDM processes. This work provides a timely and comprehensive perspective on the evolving landscape of composite machining, outlining directions for future research in adaptive and hybrid EDM technologies.
Zitieren
APA
Pedroso, A. F. V., Lucas, R., Teixeira, L., Campilho, R. D. S. G., Pinto, A. G., Costa, R. D. F. S., & Sales-Contini, R. D. C. M. (2025). Electrical Discharge Machining of Composites: A Critical Review of Challenges and Innovations. Journal of Mechanical Engineering and Manufacturing. https://doi.org/10.53941/jmem.2025.100005
Vancouver
Pedroso AFV, Lucas R, Teixeira L, Campilho RDSG, Pinto AG, Costa RDFS, et al. Electrical Discharge Machining of Composites: A Critical Review of Challenges and Innovations. Journal of Mechanical Engineering and Manufacturing. 2025. doi:10.53941/jmem.2025.100005
BibTeX
@article{Pedroso2025,
author = {Pedroso, André F. V. and Lucas, Rafael and Teixeira, Luís and Campilho, Raul D. S. G. and Pinto, Arnaldo G. and Costa, Rúben D. F. S. and Sales-Contini, Rita de Cássia Mendonça},
title = {Electrical Discharge Machining of Composites: A Critical Review of Challenges and Innovations},
journal = {Journal of Mechanical Engineering and Manufacturing},
year = {2025},
doi = {10.53941/jmem.2025.100005}
}
EUVIMED