EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of ZnO-AC Nanocomposite Electrodes for Supercapacitor Applications

Prosper Ifeanyichukwu Oghome, Innocent Sunday Ike, Eric Egwu Kalu, Felicia Lebechukwu Kamen, Samson Olufisayo Olubiyi, Mesfin Abayneh Kebede, Abdulhakeem Bello

Applied Energy Science · 12.11.2026 · 1 (1)

DOI: 10.53941/aes.2026.100009 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Energy Science, online erschienen am 12.11.2026. Verfasst von Prosper Ifeanyichukwu Oghome und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of rice husk ash, an agricultural-waste-derived feedstock, a potentially greener route to ZnO and activated carbon from unripe plantain peel was considered in the synthesis of ZnO-AC nanocomposite material for electrodes. The ZnO-AC (activated carbon) nanocomposite was prepared in different ratios of as-synthesized ZnO and AC to ascertain the optimum electrode material. The nanocomposites were characterized by scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), and Brunauer-Emmett-Teller analysis (BET) (Micromeritics Instrument Corporation, Norcross, GA, USA). In addition, the electrochemical properties of the prepared nanocomposite electrodes were investigated using cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS) in 6 M KOH as the electrolyte in a three-electrode setup with nickel foam current collector. The as-prepared ZnO–AC nanocomposite electrodes with ratios of (1:1, 2:1, 3:1, and 4:1) had specific capacitance of 322 F g−1, 113 F g−1, 46.7 F g−1, and 40.7 F g−1 at 5 mV s−1, respectively. The electrochemical performance of the ZnO/activated carbon composites is strongly influenced by the ZnO-to-activated carbon ratio. The comparative kinetic investigation proves that electrode performance of the composite material was not governed solely by the quantity of pseudocapacitive zinc oxide added, but rather by the preservation of continuous electronic and ionic percolation pathways. Among the investigated compositions (1:1, 2:1, 3:1 and 4:1), the 1:1 ZnO-AC composite exhibited the optimal structural threshold as it maintains an unblocked porous carbon network for fast ion diffusion (Rd2 (finite-length diffusion resistance) = 0.5597 Ω), maximizes pseudocapacitive site utilization without inducing interfacial polarization (R2 (charge-transfer resistance) = 4.824 Ω), it synergizes EDLC and pseudocapacitive kinetics (b = 0.58) and delivered the highest specific capacitance from both CV (322 F g−1) at scan rate of 5 mV/s and GCD (227.56 F g−1) at current density of 1 A g−1 All the composites maintained good coulombic efficiency around unity and reasonable stability after 3000 cycles.

Zitieren

APA

Oghome, P. I., Ike, I. S., Kalu, E. E., Kamen, F. L., Olubiyi, S. O., Kebede, M. A., & Bello, A. (2026). Optimization of ZnO-AC Nanocomposite Electrodes for Supercapacitor Applications. Applied Energy Science, 1(1). https://doi.org/10.53941/aes.2026.100009

Vancouver

Oghome PI, Ike IS, Kalu EE, Kamen FL, Olubiyi SO, Kebede MA, et al. Optimization of ZnO-AC Nanocomposite Electrodes for Supercapacitor Applications. Applied Energy Science. 2026;1(1). doi:10.53941/aes.2026.100009

BibTeX
@article{Oghome2026,
  author = {Oghome, Prosper Ifeanyichukwu and Ike, Innocent Sunday and Kalu, Eric Egwu and Kamen, Felicia Lebechukwu and Olubiyi, Samson Olufisayo and Kebede, Mesfin Abayneh and Bello, Abdulhakeem},
  title = {Optimization of ZnO-AC Nanocomposite Electrodes for Supercapacitor Applications},
  journal = {Applied Energy Science},
  year = {2026},
  volume = {1},
  number = {1},
  doi = {10.53941/aes.2026.100009}
}
Kostenlos starten →