EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Different Types and Ratio of Fibers on the Tensile Strength of Reinforced Foam Concrete: A Review

Soran Abdrahman Ahmad, Azhar Jawad Nimat, Hersh F. Mahmood

Emerging Technologies and Engineering Journal · 2024

DOI: 10.53898/etej2024125 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Emerging Technologies and Engineering Journal, 2024. Verfasst von Soran Abdrahman Ahmad und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reducing the weight of buildings—particularly dead loads—is one effective way to lower construction costs. Foam concrete offers a viable alternative to conventional concrete for non-structural elements. This paper reviews the impact of incorporating polypropylene, natural fibers, steel fibers from waste tyres, and carbon fibers on the tensile strength of foamed concrete. According to the literature, the polypropylene content varied between 0.2% and 0.8%, with different target densities. Steel fibers extracted from scrap tyres ranged from 0.2% to 0.6%, while carbon fiber and Henequen fiber (natural fiber) were used separately or in combination with polymers in volumetric fractions ranging from 0.5% to 1.5%. The results presented in this paper indicate that tensile strength gradually increased as the volume of fibers increased up to a certain point, suggesting an optimal dosage for enhancing performance.

Zitieren

APA

Ahmad, S. A., Nimat, A. J., & Mahmood, H. F. (2024). Effect of Different Types and Ratio of Fibers on the Tensile Strength of Reinforced Foam Concrete: A Review. Emerging Technologies and Engineering Journal. https://doi.org/10.53898/etej2024125

Vancouver

Ahmad SA, Nimat AJ, Mahmood HF. Effect of Different Types and Ratio of Fibers on the Tensile Strength of Reinforced Foam Concrete: A Review. Emerging Technologies and Engineering Journal. 2024. doi:10.53898/etej2024125

BibTeX
@article{Ahmad2024,
  author = {Ahmad, Soran Abdrahman and Nimat, Azhar Jawad and Mahmood, Hersh F.},
  title = {Effect of Different Types and Ratio of Fibers on the Tensile Strength of Reinforced Foam Concrete: A Review},
  journal = {Emerging Technologies and Engineering Journal},
  year = {2024},
  doi = {10.53898/etej2024125}
}
Kostenlos starten →