EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Utilization of Neem Seed Oil as Surfactant in the Production of Flexible and Rigid Polyurethane Foam

Habib Abba Sanda, Muhammad Abbagoni Abubakar, Abdulhalim Musa Abubakar, Mamman Bashir, Martin Stojchevski

Emerging Technologies and Engineering Journal · 2024

DOI: 10.53898/etej2024123 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Emerging Technologies and Engineering Journal, 2024. Verfasst von Habib Abba Sanda und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Extraction and processing of polyether polyols derived from petrochemicals, commonly used as surfactants during polyurethane foam (PUF) production, contribute to carbon emissions and raises the issue of long-term sustainability given that petrochemicals are non-renewable resources. Here, 5 mg and 4 mg of neem seed oil are employed to form flexible and rigid PUF, classified purposefully based on their divergent usage. To find an environmentally friendly replacement, flexible PUF whose mass, volume, density, compression, tensile strength, cream time, foam rise and rising time are 0.0047 kg m3, 16.52 kg/m3, 8.10%, 39.28 kN/m2, 60s, 10s and 60s is formed by mixing 1.25 kg polyol, 5mg silicon oil and 10g calcium carbonate (CaCO3). Likewise, by mixing 1.2 kg polyol, 4mg silicon oil and 8g CaCO3, a rigid PUF with 0.005kg, m3, 16.2 kg/m3, 8.15%, 40.72 kN/m2, 50s, 15 cm and 58s key, physical and mechanical property as respectively listed under the flexible PUF formulation is produced. Both foams were produced using equal amounts of toluene diisocyanate, water, stannous octoate and methylene chloride, resulting in PUF that can be used in insulation, cushioning and construction support applications based on their characteristic height, density, tensile strength and compressive strength. As the surfactant, neem seed oil's potential in the synthesis of PUF cannot be overemphasized. The study of the kinetics of PUF production is limited and should trigger the adoption of biobased surfactants for industrial applications in the future.

Zitieren

APA

Sanda, H. A., Abubakar, M. A., Abubakar, A. M., Bashir, M., & Stojchevski, M. (2024). Utilization of Neem Seed Oil as Surfactant in the Production of Flexible and Rigid Polyurethane Foam. Emerging Technologies and Engineering Journal. https://doi.org/10.53898/etej2024123

Vancouver

Sanda HA, Abubakar MA, Abubakar AM, Bashir M, Stojchevski M. Utilization of Neem Seed Oil as Surfactant in the Production of Flexible and Rigid Polyurethane Foam. Emerging Technologies and Engineering Journal. 2024. doi:10.53898/etej2024123

BibTeX
@article{Sanda2024,
  author = {Sanda, Habib Abba and Abubakar, Muhammad Abbagoni and Abubakar, Abdulhalim Musa and Bashir, Mamman and Stojchevski, Martin},
  title = {Utilization of Neem Seed Oil as Surfactant in the Production of Flexible and Rigid Polyurethane Foam},
  journal = {Emerging Technologies and Engineering Journal},
  year = {2024},
  doi = {10.53898/etej2024123}
}
Kostenlos starten →