Reinforcing Fiber-Cement Composites for Flooring with Fibers from Low-Grade Coal Fly Ash
Suan Sunandha Science and Technology Journal · 14.07.2025 · 12 (2) · 1-8
DOI: 10.53848/ssstj.v12i2.973 ↗Kurz gefasst
Fachartikel in der Zeitschrift Suan Sunandha Science and Technology Journal, online erschienen am 14.07.2025. Verfasst von Parinya Chakartnarodom und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Low-grade coal fly ash (LGFA) is characterized as fly ash with a sulfur trioxide (SO3) content exceeding 5%, according to the ASTM C618 standard. The fibers derived from this LGFA, combined with dolomite and basalt, served as the reinforcing phase in fiber-reinforced cement composite (FRCC) samples designed for flooring systems. These FRCC samples were manufactured using the filter pressing method and subjected to air curing for 7 and 28 days. Following the curing process, a three-point bend test was conducted to assess their modulus of rupture (MOR) and modulus of elasticity (MOE), an impact test was performed to measure their impact strength, and their bulk density was determined using Archimedes method.Low-grade coal fly ash (LGFA), as defined by ASTM C618, is fly ash with a sulfur trioxide (SO₃) content exceeding 5%. This LGFA can be used with dolomite and basalt to produce fibers for fiber-reinforced cement composite (FRCC) specifically designed for flooring systems replacing the more expensive PVA fibers. Specimens of the FRCC flooring were fabricated using the filter-pressing method and cured in air for 7 and 28 days. Following curing, the modulus of rupture (MOR) and modulus of elasticity (MOE) were determined from three-point bend tests. The results demonstrated that both MOR and MOE of the FRCC specimens increased with longer curing durations. While statistical analysis revealed no significant correlation between LGFA fiber content and MOR, a positive linear relationship was observed between LGFA fiber content and the MOE, indicating an enhanced elastic modulus with greater LGFA fiber content. Both values meet or exceed the ASTM standard required for flooring boards while making use of a waste product at a lower manufacturing cost.
Zitieren
APA
Chakartnarodom, P., Polsilapa, S., Prakaypan, W., Ineure, P., Chuankrerkkul, N., Laitila, E. A., & Kongkajun, N. (2025). Reinforcing Fiber-Cement Composites for Flooring with Fibers from Low-Grade Coal Fly Ash. Suan Sunandha Science and Technology Journal, 12(2), 1-8. https://doi.org/10.53848/ssstj.v12i2.973
Vancouver
Chakartnarodom P, Polsilapa S, Prakaypan W, Ineure P, Chuankrerkkul N, Laitila EA, et al. Reinforcing Fiber-Cement Composites for Flooring with Fibers from Low-Grade Coal Fly Ash. Suan Sunandha Science and Technology Journal. 2025;12(2):1-8. doi:10.53848/ssstj.v12i2.973
BibTeX
@article{Chakartnarodom2025,
author = {Chakartnarodom, Parinya and Polsilapa, Sureerat and Prakaypan, Wichit and Ineure, Pitcharat and Chuankrerkkul, Nutthita and Laitila, Edward A. and Kongkajun, Nuntaporn},
title = {Reinforcing Fiber-Cement Composites for Flooring with Fibers from Low-Grade Coal Fly Ash},
journal = {Suan Sunandha Science and Technology Journal},
year = {2025},
volume = {12},
number = {2},
pages = {1--8},
doi = {10.53848/ssstj.v12i2.973}
}
EUVIMED