Optimasi Proses Reduksi dan Flokulasi Cr(VI) oleh FeSO4 pada Limbah Simulasi Elektroplating
Venn: Journal of Sustainable Innovation on Education, Mathematics and Natural Sciences · 26.02.2026 · 5 (2) · 312-322
DOI: 10.53696/venn.v5i2.405 ↗Kurz gefasst
Fachartikel in der Zeitschrift Venn: Journal of Sustainable Innovation on Education, Mathematics and Natural Sciences, online erschienen am 26.02.2026. Verfasst von Riska Mardiyanti und 3 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The increasing activity of the electroplating industry contributes to environmental pollution through wastewater containing toxic and carcinogenic hexavalent chromium [Cr (VI)]. This study aimed to determine the optimum conditions for Cr (VI) reduction–flocculation using iron (II) sulfate (FeSO₄) and to evaluate its application in simulated multi-metal electroplating wastewater. Batch optimization was conducted by varying pH (3–11), contact time (1–60 minutes), FeSO₄ dosage (0.01–0.3 g), and initial Cr(VI) concentration (50–500 mg/L). Cr (VI) concentration was analyzed using UV–Vis spectrophotometry with 1,5-diphenylcarbazide reagent at a maximum wavelength of 541.5 nm. The optimum conditions were obtained at pH 8, 5 minutes of contact time, and 0.1 g of FeSO₄, achieving 99.89% removal of Cr (VI) from an initial concentration of 100 mg/L. In simulated multi-metal wastewater, the removal efficiency reached 99.9% with a final concentration of 0.0921 mg/L, meeting the applicable discharge standards. These findings provide practical implications as initial operational parameters and demonstrate the potential of FeSO₄ as a simple and rapid pre-treatment method prior to further treatment processes. Further studies are recommended to validate the method using actual electroplating wastewater and to evaluate the influence of interfering ions and Fe²⁺ oxidation, for example through operational control or the use of freshly prepared FeSO₄ solution to ensure process stability.
Zitieren
APA
Mardiyanti, R., Basir, D. N., Musallam, A. N., & Mustawa, M. A. (2026). Optimasi Proses Reduksi dan Flokulasi Cr(VI) oleh FeSO4 pada Limbah Simulasi Elektroplating. Venn: Journal of Sustainable Innovation on Education, Mathematics and Natural Sciences, 5(2), 312-322. https://doi.org/10.53696/venn.v5i2.405
Vancouver
Mardiyanti R, Basir DN, Musallam AN, Mustawa MA. Optimasi Proses Reduksi dan Flokulasi Cr(VI) oleh FeSO4 pada Limbah Simulasi Elektroplating. Venn: Journal of Sustainable Innovation on Education, Mathematics and Natural Sciences. 2026;5(2):312-322. doi:10.53696/venn.v5i2.405
BibTeX
@article{Mardiyanti2026,
author = {Mardiyanti, Riska and Basir, Djabal Nur and Musallam, Abdurrahman Noval and Mustawa, Muhammad Al},
title = {Optimasi Proses Reduksi dan Flokulasi Cr(VI) oleh FeSO4 pada Limbah Simulasi Elektroplating},
journal = {Venn: Journal of Sustainable Innovation on Education, Mathematics and Natural Sciences},
year = {2026},
volume = {5},
number = {2},
pages = {312--322},
doi = {10.53696/venn.v5i2.405}
}
EUVIMED