Industry 4.0: An innovative manufacturing process on a Digital Twin Application
EASI: Ingeniería y Ciencias Aplicadas en la Industria · 2023
DOI: 10.53591/easi.v2i1.2176 ↗Kurz gefasst
Fachartikel in der Zeitschrift EASI: Ingeniería y Ciencias Aplicadas en la Industria, 2023. Verfasst von Marcelo Fajardo-Pruna und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
The fourth industrial revolution requires the process equipment to work together through the strategy of cyber-physical systems. This project aims to contribute to this revolution by presenting a tool and methodology for creating cyber-physical systems. A V-model was used for the design process, in which the digital twin of a 3PRS+XY+C machine tool was developed. It started by defining the requirements, the basis for creating the logical-functional structure. This structure was the guide for completing the behavioural models of each element, the cascade control, and the 3D design of the machine. The simulation was carried out with the digital twin ready to verify the correct operation. A position and speed test were performed with step start and a second order signal showing proper control and compliance with the setpoint. The tests performed show that the strategy used allowed the realisation of the digital twin that conforms to the cyber-physical system of the machine. Also, due to the design mode, the model is highly flexible, and its modular structure facilitates the changes. It is the right time to apply this strategy in the Ecuadorian industry and thus reduce the technological gap and increase international competitiveness.
Zitieren
APA
Fajardo-Pruna, M., Lopez-Estrada, L., Sanchez-Orosco, D., Tutiven, C., & Pillajo-Quijia, G. (2023). Industry 4.0: An innovative manufacturing process on a Digital Twin Application. EASI: Ingeniería y Ciencias Aplicadas en la Industria. https://doi.org/10.53591/easi.v2i1.2176
Vancouver
Fajardo-Pruna M, Lopez-Estrada L, Sanchez-Orosco D, Tutiven C, Pillajo-Quijia G. Industry 4.0: An innovative manufacturing process on a Digital Twin Application. EASI: Ingeniería y Ciencias Aplicadas en la Industria. 2023. doi:10.53591/easi.v2i1.2176
BibTeX
@article{FajardoPruna2023,
author = {Fajardo-Pruna, Marcelo and Lopez-Estrada, Luis and Sanchez-Orosco, Daniela and Tutiven, Christian and Pillajo-Quijia, Giovanny},
title = {Industry 4.0: An innovative manufacturing process on a Digital Twin Application},
journal = {EASI: Ingeniería y Ciencias Aplicadas en la Industria},
year = {2023},
doi = {10.53591/easi.v2i1.2176}
}
EUVIMED