EUVIMEDEUVIMED entdecken
Crossref

Evolution of Mechanical Properties of an AA 6061 T6 Aluminum alloy Processed by Cold Working (CW)

Debıh ALİ

Journal of Scientific Technology and Engineering Research · 2023

DOI: 10.53525/jster.1233386 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Scientific Technology and Engineering Research, 2023. Verfasst von Debıh ALİ. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nano scale grain size reduction (UFG) is one of three suitable methods for improving the mechanical properties of 6000 series aluminum alloys, by structural precipitation, strain hardening or by cold work hardening. For the cold working, several techniques are now available such as (ECAP - PC), (CEEA), (THP), (MM), (ARB), (CW). Cold work by compression high pressing (CW-CHP) can be applied in several cycles depending on the hardening behavior of the material. The influence of the nonmetric size of the grains produced by the (CW-CHP) of a cylindrical rolling machine with four passes of Sever plastic deformation with reduction ratios of (3.5, 10,18.8 and 28%), on the mechanical behavior of the alloy 6061 T6, was analyzed by determining the ultimate tensile strength (Rm), yield strength (Rp0.2, the strain hardening capacity SHC (Rm-Rp0.2), the work hardening coefficient n', the modulus of 'work hardening K' . The increase in the rate of work hardening by the reduction of the sample sections and consequently the reduction of the grain size at the first and the second pass, improves the mechanical properties of the alloy to the maximum values, and then the presence of crack initiation participates to the moderate decrease of the mechanical properties.

Zitieren

APA

ALİ, D. (2023). Evolution of Mechanical Properties of an AA 6061 T6 Aluminum alloy Processed by Cold Working (CW). Journal of Scientific Technology and Engineering Research. https://doi.org/10.53525/jster.1233386

Vancouver

ALİ D. Evolution of Mechanical Properties of an AA 6061 T6 Aluminum alloy Processed by Cold Working (CW). Journal of Scientific Technology and Engineering Research. 2023. doi:10.53525/jster.1233386

BibTeX
@article{AL2023,
  author = {ALİ, Debıh},
  title = {Evolution of Mechanical Properties of an AA 6061 T6 Aluminum alloy Processed by Cold Working (CW)},
  journal = {Journal of Scientific Technology and Engineering Research},
  year = {2023},
  doi = {10.53525/jster.1233386}
}
Kostenlos starten →