EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Pieces Separation Applied to a RV-2AJ Industrial Manipulator

Francisco Vanier De Andrade, Felipe Câmara de Freitas, Marcus V. L. Machado de Andrade

International Journal of Electrical and Computer Engineering Research · 2023

DOI: 10.53375/ijecer.2023.326 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Electrical and Computer Engineering Research, 2023. Verfasst von Francisco Vanier De Andrade und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this work is to create a system for separating types of pieces for didactic purposes. An artificial vision system applied to a manipulator was used to perform this task of classifying and separating the pieces, through the use of digital image processing. The vision system uses a camera attached to the robot's end-effector, whose objective is to identify the area, perimeter and position of the centroid of the pieces to be separated. The separation of objects is performed between two classes: with round and non-round shapes. The tests were carried out with objects such as screws and nuts. After obtaining the positions of the objects to be separated by the vision system, some characteristics of these related to the reference system of the robot base are determined. Some difficulties were observed in the recognition of objects related to the colours and lighting conditions of the separation environment. To reduce these problems, black colour objects were used in order to reduce the reflectance. Another problem encountered in the separation process is related to the relative position of objects. In this case, two or more objects can be identified as a single object, depending on their relative positions. The system classifies with a rate of hits greater than 95%.

Zitieren

APA

Andrade, F. V. D., Freitas, F. C. D., & Andrade, M. V. L. M. D. (2023). Pieces Separation Applied to a RV-2AJ Industrial Manipulator. International Journal of Electrical and Computer Engineering Research. https://doi.org/10.53375/ijecer.2023.326

Vancouver

Andrade FVD, Freitas FCD, Andrade MVLMD. Pieces Separation Applied to a RV-2AJ Industrial Manipulator. International Journal of Electrical and Computer Engineering Research. 2023. doi:10.53375/ijecer.2023.326

BibTeX
@article{Andrade2023,
  author = {Andrade, Francisco Vanier De and Freitas, Felipe Câmara de and Andrade, Marcus V. L. Machado de},
  title = {Pieces Separation Applied to a RV-2AJ Industrial Manipulator},
  journal = {International Journal of Electrical and Computer Engineering Research},
  year = {2023},
  doi = {10.53375/ijecer.2023.326}
}
Kostenlos starten →