Multiphysics Modeling to Assist Microwave Cavity Design for Food Processing
International Journal of Electrical and Computer Engineering Research · 2022
DOI: 10.53375/ijecer.2022.233 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Electrical and Computer Engineering Research, 2022. Verfasst von Ana Salvador und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Microwave technology has many current applications. It is very useful for food processing, including domestic cooking and warming-up and industrial heating and drying. It heats faster than conventional applications; however, in most cases result in non-uniform temperature distribution. Adequate cavity and equipment designs can reduce the impact of these heterogeneities and using multiples magnetrons is a possibility to mitigate hot and cold spots. Yet, the literature lacks methods to evaluate and compare multiple magnetrons designs. This study aimed to develop a procedure to evaluate the number and position of magnetrons connected to an application cavity using multiphysics modelling and simulation of the microwave distribution and heating of a food model. It was based on evaluating the electric field distribution into a selected working volume filled with air or a mixture of air-potato and the consequent effective power absorbed and temperature distribution into the air-potato medium. The assisted methodology with process simulation offers an insight into food temperature distribution, which would be very difficult to obtain experimentally or in any equipment design methodology. In this case study, it was found that up to 6 magnetrons are good enough when active in approximately 0.16 m3 cavity with a load that fills 10% of its volume.
Zitieren
APA
Salvador, A., Teleken, J., Travassos, X. L., Avila, S. L., & Carciofi, B. (2022). Multiphysics Modeling to Assist Microwave Cavity Design for Food Processing. International Journal of Electrical and Computer Engineering Research. https://doi.org/10.53375/ijecer.2022.233
Vancouver
Salvador A, Teleken J, Travassos XL, Avila SL, Carciofi B. Multiphysics Modeling to Assist Microwave Cavity Design for Food Processing. International Journal of Electrical and Computer Engineering Research. 2022. doi:10.53375/ijecer.2022.233
BibTeX
@article{Salvador2022,
author = {Salvador, Ana and Teleken, Jhony and Travassos, Xisto Lucas and Avila, Sergio Luciano and Carciofi, Bruno},
title = {Multiphysics Modeling to Assist Microwave Cavity Design for Food Processing},
journal = {International Journal of Electrical and Computer Engineering Research},
year = {2022},
doi = {10.53375/ijecer.2022.233}
}
EUVIMED