Parametric Design Optimization of CFRP Cable-based Beam–String Structures using a Reproducible Reduced-Order Numerical Model
Natural Resources for Human Health · 09.10.2026 · 6 (21s)
DOI: 10.53365/nrfhh.4535 ↗Kurz gefasst
Fachartikel in der Zeitschrift Natural Resources for Human Health, online erschienen am 09.10.2026. Verfasst von Fan Donghao und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Incorporation of the factors of initial geometry, cable axial rigidity, prestressing force, and serviceability constraints is essential for optimizing design of CFRP cable-based BSS structures. This paper documents the development of a computational workflow for evaluating the interaction of the rise-to-span ratio, cable cross-sectional area, and prestress. The workflow uses an Euler-Bernoulli beam finite element model, and represents the “contribution of inclined cable-strut segments with two equivalent vertical tangent springs. The workflow is parameterized for a range of rise-to-span ratios (0.05 to 0.15), cable cross-sectional areas (400 to 1,200 mm²), and prestressing force levels (100 to 300 kN). For each parameter case, the workflow calculates the mid-span deflection of the modeled beam, the prestressing force level, the spring constant of the equivalent spring, the length of the cable segment, and a proxy for the volume of the cable segment. To compare different designs, a score is calculated, which represents a trade-off between the proxy for the volume of the cable segment and the mid-span deflection of the beam. For the case study illustrated in this paper, it is assumed that the mid-span deflection of the beam should be less than span/300. If the mid-span deflection does not exceed 300 MPa, up to 858 candidate cases were found to satisfy the computational constraints. Based on the case study, the constraint score was the lowest for a rise-to-span ratio of 0.15, cross-sectional area of 400 mm² cable, and a prestressing force level of 225 kN. The nominal prestressing force level was 562.5 MPa, and the mid-span deflection was 10.05 mm. The results of the case study should be interpreted as a conditional optimum based on the assumptions of the computational model. The paper describes a methodology for initial-value parameter screening that is ideal for identifying and overcoming computational roadblocks related to nonlinear equilibriums, specifically cable-strut structures.
Zitieren
APA
Donghao, F., & Al-Odaini, A. (2026). Parametric Design Optimization of CFRP Cable-based Beam–String Structures using a Reproducible Reduced-Order Numerical Model. Natural Resources for Human Health, 6(21s). https://doi.org/10.53365/nrfhh.4535
Vancouver
Donghao F, Al-Odaini A. Parametric Design Optimization of CFRP Cable-based Beam–String Structures using a Reproducible Reduced-Order Numerical Model. Natural Resources for Human Health. 2026;6(21s). doi:10.53365/nrfhh.4535
BibTeX
@article{Donghao2026,
author = {Donghao, Fan and Al-Odaini, Aiman},
title = {Parametric Design Optimization of CFRP Cable-based Beam–String Structures using a Reproducible Reduced-Order Numerical Model},
journal = {Natural Resources for Human Health},
year = {2026},
volume = {6},
number = {21s},
doi = {10.53365/nrfhh.4535}
}
EUVIMED