EUVIMEDEUVIMED entdecken
Crossref

Design and Optimization of 3D Printed ASA Substrate Based Antenna for Wi-Fi 6E

Manju, Kamal Gurgar, Manish Bijaraniya, Garima Saini, Balwinder S. Dhaliwal

Electronics ETF · 15.12.2026 · 30 (2) · 94-104

DOI: 10.53314/els2630094m ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics ETF, online erschienen am 15.12.2026. Verfasst von Manju und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents design, optimization, and fabrication of a wideband microstrip patch antenna utilizing a 3D-printed acrylonitrile styrene acrylate (ASA) substrate for Wi-Fi 6E frequency band. The dielectric properties of the ASA substrate are determined using the ring resonator method. The bandwidth enhancement is achieved by modifying the conventional rectangular patch into a staircase-shaped structure and employing a partial ground plane. To fine-tune the antenna’s resonant frequency and bandwidth, a combination of curve fitting and particle swarm optimization (PSO) algorithm is utilized. The antenna comprises a patch with dimensions of 16.86 mm × 12.5 mm, situated on square substrate of size 27.5 mm × 27.5 mm. The antenna demonstrates a -10 dB impedance bandwidth ranging from 5.98 GHz to 8.62 GHz and a peak gain of 3.6 dBi at 6.525 GHz. Simulation and experimental results show good agreement, highlighting the potential of ASA as a viable substrate material for Wi-Fi 6E band antenna applications.

Zitieren

APA

Manju, Gurgar, K., Bijaraniya, M., Saini, G., & Dhaliwal, B. S. (2026). Design and Optimization of 3D Printed ASA Substrate Based Antenna for Wi-Fi 6E. Electronics ETF, 30(2), 94-104. https://doi.org/10.53314/els2630094m

Vancouver

Manju, Gurgar K, Bijaraniya M, Saini G, Dhaliwal BS. Design and Optimization of 3D Printed ASA Substrate Based Antenna for Wi-Fi 6E. Electronics ETF. 2026;30(2):94-104. doi:10.53314/els2630094m

BibTeX
@article{Manju2026,
  author = {Manju and Gurgar, Kamal and Bijaraniya, Manish and Saini, Garima and Dhaliwal, Balwinder S.},
  title = {Design and Optimization of 3D Printed ASA Substrate Based Antenna for Wi-Fi 6E},
  journal = {Electronics ETF},
  year = {2026},
  volume = {30},
  number = {2},
  pages = {94--104},
  doi = {10.53314/els2630094m}
}
Kostenlos starten →