Rancang Bangun Pengendalian Flow Menggunakan Orifice Dengan Metode PID Controller
Journal of Instrumentation and Hardware · 30.06.2025 · 3 (1) · 8-15
DOI: 10.53026/inhardware.v3i1.65 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Instrumentation and Hardware, online erschienen am 30.06.2025. Verfasst von Trian Juvita Putri und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
Fluid flow instability due to pressure changes, external disturbances, and inaccuracies in adjusting the flow rate to the set point value are common problems in flow control. To overcome this, a flow control system using an orifice with the PID Controller method is designed. This system aims to maintain the fluid flow rate in the pipe to match the desired set point value. The orifice plate used is a concentric type made of stainless steel with a hole diameter of 0.54 inches and a thickness of 2.1 mm, installed on a 1-inch diameter pipe. The pressure difference between the upstream and downstream sides of the orifice is used to calculate the flow rate. The prototype design includes mechanical, wiring, and system interface stages using the Nextion HMI as a local monitoring medium in real time. PID parameters are obtained using the Ziegler-Nichols 1 method with S-curve analysis from the bump test. The results show that PI control (Kp = 1.8; Ti = 6.6) provides a more stable response even though there is an offset, without overshoot.
Zitieren
APA
Putri, T. J., Pradana, M. R., & Handaja, S. (2025). Rancang Bangun Pengendalian Flow Menggunakan Orifice Dengan Metode PID Controller. Journal of Instrumentation and Hardware, 3(1), 8-15. https://doi.org/10.53026/inhardware.v3i1.65
Vancouver
Putri TJ, Pradana MR, Handaja S. Rancang Bangun Pengendalian Flow Menggunakan Orifice Dengan Metode PID Controller. Journal of Instrumentation and Hardware. 2025;3(1):8-15. doi:10.53026/inhardware.v3i1.65
BibTeX
@article{Putri2025,
author = {Putri, Trian Juvita and Pradana, Mohammad Rizky and Handaja, Suka},
title = {Rancang Bangun Pengendalian Flow Menggunakan Orifice Dengan Metode PID Controller},
journal = {Journal of Instrumentation and Hardware},
year = {2025},
volume = {3},
number = {1},
pages = {8--15},
doi = {10.53026/inhardware.v3i1.65}
}
EUVIMED