EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and Numerical Investigations of a 3D-Printed Monolithic Inconel Channel in Hot Sodium up to 500°C

Alexandru Onea, Joachim Fuchs, Alfons Weisenburger, Steffen Antusch, Sebastian Ruck

SolarPACES Conference Proceedings · 18.11.2026 · 4

DOI: 10.52825/solarpaces.v4i.3083 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SolarPACES Conference Proceedings, online erschienen am 18.11.2026. Verfasst von Alexandru Onea und 4 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

At KIT a 3D-printed test monolithic channel with meandering inner and outer channels and a rectangular cross-section has been developed using the Selective Laser Melting method and proposed as candidate material for a high temperature receiver. The prototype material has been manufactured from Inconel 718 powder using the Cold Spray metal powder deposition. The prototype was integrated in the high temperature SOLTEC-2 sodium facility and heated only on one side, deemed as the side that receives the solar irradiation. Experimental investigations have been performed up to 500°C. Besides the experimental investigations performed the present study presents also the numerical simulations of the 3D-printed prototype material and a comparison is made between the experimental and numerical results.

Zitieren

APA

Onea, A., Fuchs, J., Weisenburger, A., Antusch, S., & Ruck, S. (2026). Experimental and Numerical Investigations of a 3D-Printed Monolithic Inconel Channel in Hot Sodium up to 500°C. SolarPACES Conference Proceedings, 4. https://doi.org/10.52825/solarpaces.v4i.3083

Vancouver

Onea A, Fuchs J, Weisenburger A, Antusch S, Ruck S. Experimental and Numerical Investigations of a 3D-Printed Monolithic Inconel Channel in Hot Sodium up to 500°C. SolarPACES Conference Proceedings. 2026;4. doi:10.52825/solarpaces.v4i.3083

BibTeX
@article{Onea2026,
  author = {Onea, Alexandru and Fuchs, Joachim and Weisenburger, Alfons and Antusch, Steffen and Ruck, Sebastian},
  title = {Experimental and Numerical Investigations of a 3D-Printed Monolithic Inconel Channel in Hot Sodium up to 500°C},
  journal = {SolarPACES Conference Proceedings},
  year = {2026},
  volume = {4},
  doi = {10.52825/solarpaces.v4i.3083}
}
Kostenlos starten →