EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Performance and Pressure Drop of a Packed Bed Thermal Energy Storage Unit

Birlie Birhanu, Ryan Mozafari, Joe Coventry, Gary Rosengarten, Ahmad Mojiri

SolarPACES Conference Proceedings · 18.11.2026 · 4

DOI: 10.52825/solarpaces.v4i.3029 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SolarPACES Conference Proceedings, online erschienen am 18.11.2026. Verfasst von Birlie Birhanu und 4 weiteren Autor:innen. Die Arbeit nennt 9 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Renewable Energy Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-temperature packed bed thermal energy storage systems are promising solutions for concentrated solar power and industrial heat recovery due to their simplicity, scalability, and cost-effectiveness. Their performance depends strongly on the choice of heat transfer fluids and storage materials, which influence thermal efficiency, pressure drop, and thermocline stability. In this study, a validated numerical model was applied to simulate a 20 MWhth packed bed operating with a constant 10 MWth charging and discharging thermal power. Three heat transfer fluids (air, helium, and steam) and three storage materials (steatite, alumina, and magnesia) were evaluated in terms of charging efficiency, discharging efficiency, and pressure drop. The results show that air achieved the highest charging efficiency (87.5%), while steam provided superior discharging efficiency (70.2%) with the lowest pressure drop. For storage materials, alumina outperformed steatite and magnesia, exhibiting the highest overall efficiency and lowest flow resistance due to its favourable thermal properties. Analysis of thermocline formation revealed that sharper stratification directly enhanced both charging and discharging performance, highlighting the importance of density and heat capacity effects on thermal behaviour. Overall, the findings emphasise the trade-offs between thermal and hydraulic performance in packed bed thermal energy storage systems and demonstrate that careful selection of heat transfer fluids and storage materials is essential to optimise efficiency and reduce pressure losses. These insights contribute to the development of cost-effective, reliable, and high-performance thermal energy storage technologies for renewable energy integration.

Förderung

  • Australian Renewable Energy Agency

Zitieren

APA

Birhanu, B., Mozafari, R., Coventry, J., Rosengarten, G., & Mojiri, A. (2026). Performance and Pressure Drop of a Packed Bed Thermal Energy Storage Unit. SolarPACES Conference Proceedings, 4. https://doi.org/10.52825/solarpaces.v4i.3029

Vancouver

Birhanu B, Mozafari R, Coventry J, Rosengarten G, Mojiri A. Performance and Pressure Drop of a Packed Bed Thermal Energy Storage Unit. SolarPACES Conference Proceedings. 2026;4. doi:10.52825/solarpaces.v4i.3029

BibTeX
@article{Birhanu2026,
  author = {Birhanu, Birlie and Mozafari, Ryan and Coventry, Joe and Rosengarten, Gary and Mojiri, Ahmad},
  title = {Performance and Pressure Drop of a Packed Bed Thermal Energy Storage Unit},
  journal = {SolarPACES Conference Proceedings},
  year = {2026},
  volume = {4},
  doi = {10.52825/solarpaces.v4i.3029}
}
Kostenlos starten →