Testing of a 40-kWth Counterflow Particle-Supercritical Carbon Dioxide Narrow-Channel, Fluidized Bed Heat Exchanger
SolarPACES Conference Proceedings · 2024
DOI: 10.52825/solarpaces.v1i.634 ↗Kurz gefasst
Fachartikel in der Zeitschrift SolarPACES Conference Proceedings, 2024. Verfasst von Winfred Arthur-Arhin und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Solar Energy Technologies Office.
Abstract (Originalsprache)
Particle-based primary heat exchangers (HXs) must deliver sCO2 fluid temperatures above 700°C to couple particle-based concentrating solar receivers and thermal energy storage (TES) sub-systems with efficient sCO2 power cycles. Particle-sCO2 HX designs have struggled to meet DOE cost targets (≤ $150/kWth) due to the amount of expensive nickel alloys necessary for manufacturing full-scale, particle-sCO2 HXs. Our team has demonstrated that mild bubbling fluidization of falling particles in a counterflow narrow-channel fluidized bed can reduce required HX surface area and thus, costs by increasing particle-wall heat transfer coefficients hT,w > 800 W m-2 K-1. This paper reports on the fabrication and testing of a stainless steel, particle-sCO2 HX with 12 fluidized-bed channels approximately 10.5 mm deep spaced between diffusion-bonded, micro-channel sCO2 plates. The HX with a core length of ≈0.56 m is fed with CARBOBEAD HSP particles through a short, fluidized freeboard zone just above the core. Testing to date in the National Solar Thermal Test Facility (NSTTF) at Sandia National Laboratories has shown that parallel bed fluidization maintains uniform particle inventory across the instrumented channels. Heat transfer thermal duty between the particle and sCO2 flows exceeds 30 kWth with sCO2 inlet temperatures of 200ºC and particle inlet temperatures up to 440ºC and mass flow rates of 0.2 kg s-1 fluidized by counterflowing gas flow rates of 0.005 kg s-1. Tests at higher particle and sCO2 inlet temperatures (600ºC and 400ºC respectively) are targeted to achieve > 40 kWth with model-predicted overall heat transfer coefficients U > 400 W m-2 K-1.
Förderung
- Solar Energy Technologies Office
Zitieren
APA
Arthur-Arhin, W., Fosheim, J. R., Brewster, K. J., Thompson, A., Albrecht, K. J., Amogne, D., & Jackson, G. S. (2024). Testing of a 40-kWth Counterflow Particle-Supercritical Carbon Dioxide Narrow-Channel, Fluidized Bed Heat Exchanger. SolarPACES Conference Proceedings. https://doi.org/10.52825/solarpaces.v1i.634
Vancouver
Arthur-Arhin W, Fosheim JR, Brewster KJ, Thompson A, Albrecht KJ, Amogne D, et al. Testing of a 40-kWth Counterflow Particle-Supercritical Carbon Dioxide Narrow-Channel, Fluidized Bed Heat Exchanger. SolarPACES Conference Proceedings. 2024. doi:10.52825/solarpaces.v1i.634
BibTeX
@article{ArthurArhin2024,
author = {Arthur-Arhin, Winfred and Fosheim, Jesse R. and Brewster, Keaton J. and Thompson, Azariah and Albrecht, Kevin J. and Amogne, Dereje and Jackson, Gregory S.},
title = {Testing of a 40-kWth Counterflow Particle-Supercritical Carbon Dioxide Narrow-Channel, Fluidized Bed Heat Exchanger},
journal = {SolarPACES Conference Proceedings},
year = {2024},
doi = {10.52825/solarpaces.v1i.634}
}
EUVIMED