EUVIMEDEUVIMED entdecken
Crossref

Lightweight Design of Gear Casing Using Topology Optimization and Modal Analysis

Rajkumar Easwara pillai

Dandao Xuebao/Journal of Ballistics · 19.06.2026 · 38 (2) · 830-839

DOI: 10.52783/dxjb.v38.421 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dandao Xuebao/Journal of Ballistics, online erschienen am 19.06.2026. Verfasst von Rajkumar Easwara pillai.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Topology optimization is employed to determine the optimal material distribution for a given set of loading conditions. A thorough understanding of the original design is essential before performing optimization, as the objective is not only to reduce weight but also to retain the structural performance of the component. In this paper, weight reduction of the gear casing is carried out while maintaining its stiffness and natural frequency characteristics. To establish the baseline performance of the existing design, Normal Mode Analysis and Linear Static Analysis were performed on the gear casing. The accuracy and feasibility of topology optimization largely depend on the selection of appropriate input parameters and constraints. Excessive design constraints may restrict the solution space and lead to infeasible optimization results. Therefore, instead of considering all ten natural frequencies as constraints, only the first three natural frequencies were selected as design constraints for the topology optimization of the gear casing. This approach provides sufficient control over the dynamic behavior of the structure while allowing the solver to generate a feasible and efficient lightweight design

Zitieren

APA

pillai, R. E. (2026). Lightweight Design of Gear Casing Using Topology Optimization and Modal Analysis. Dandao Xuebao/Journal of Ballistics, 38(2), 830-839. https://doi.org/10.52783/dxjb.v38.421

Vancouver

pillai RE. Lightweight Design of Gear Casing Using Topology Optimization and Modal Analysis. Dandao Xuebao/Journal of Ballistics. 2026;38(2):830-839. doi:10.52783/dxjb.v38.421

BibTeX
@article{pillai2026,
  author = {pillai, Rajkumar Easwara},
  title = {Lightweight Design of Gear Casing Using Topology Optimization and Modal Analysis},
  journal = {Dandao Xuebao/Journal of Ballistics},
  year = {2026},
  volume = {38},
  number = {2},
  pages = {830--839},
  doi = {10.52783/dxjb.v38.421}
}
Kostenlos starten →