Fabrication, Mechanical and Thermal Behaviour of Al7075–Fe₂O₃ Metal Matrix Composite
Dandao Xuebao/Journal of Ballistics · 19.06.2026 · 38 (2) · 786-804
DOI: 10.52783/dxjb.v38.412 ↗Kurz gefasst
Fachartikel in der Zeitschrift Dandao Xuebao/Journal of Ballistics, online erschienen am 19.06.2026. Verfasst von Santosh Wankhade.
Abstract (Originalsprache)
The present study investigates the fabrication, mechanical behaviour, thermal characteristics, and microstructural evolution of Al7075–Fe₂O₃ metal matrix composites developed through the stir-casting route. Al7075, a high-strength aluminium alloy, exhibits limitations in wear resistance and thermal stability; thus, Fe₂O₃ ceramic reinforcement was incorporated at varying weight fractions to enhance structural performance. The stir-casting process enabled effective dispersion of micron-sized Fe₂O₃ particles through controlled vortex formation, reinforcement preheating, magnesium-assisted wetting, and argon-shielded melting. Mechanical characterization revealed a consistent increase in tensile strength from 322 MPa (0%) to 387 MPa (6% Fe₂O₃), supported by grain refinement, dislocation pinning, and load-transfer mechanisms. Hardness improved from 98 HV to 139 HV, while wear rate decreased by nearly 50%, indicating the strong abrasion-resistant role of Fe₂O₃ particles. However, ductility decreased due to restricted plastic deformation and localized stress concentration near ceramic clusters. Thermal analysis confirmed enhanced thermo-stability, with TGA results showing reduced mass loss and improved oxidation resistance at higher reinforcement levels. Microstructural observations demonstrated refined grains, uniform particle distribution at lower reinforcement percentages, and controlled porosity. SEM fractography confirmed a progressive shift from ductile to brittle fracture with increasing Fe₂O₃, while EDS spectra validated successful Fe–O incorporation without unwanted intermetallics. Overall, the study concludes that Fe₂O₃ reinforcement significantly improves the mechanical robustness, tribological performance, and thermal stability of Al7075 composites, making them suitable for aerospace, automotive, and high-temperature structural applications.
Zitieren
APA
Wankhade, S. (2026). Fabrication, Mechanical and Thermal Behaviour of Al7075–Fe₂O₃ Metal Matrix Composite. Dandao Xuebao/Journal of Ballistics, 38(2), 786-804. https://doi.org/10.52783/dxjb.v38.412
Vancouver
Wankhade S. Fabrication, Mechanical and Thermal Behaviour of Al7075–Fe₂O₃ Metal Matrix Composite. Dandao Xuebao/Journal of Ballistics. 2026;38(2):786-804. doi:10.52783/dxjb.v38.412
BibTeX
@article{Wankhade2026,
author = {Wankhade, Santosh},
title = {Fabrication, Mechanical and Thermal Behaviour of Al7075–Fe₂O₃ Metal Matrix Composite},
journal = {Dandao Xuebao/Journal of Ballistics},
year = {2026},
volume = {38},
number = {2},
pages = {786--804},
doi = {10.52783/dxjb.v38.412}
}
EUVIMED