Fabrication and Mechanical Characterization of Al-TiC and Al-SiC Hybrid Metal-Matrix Composites
Dandao Xuebao/Journal of Ballistics · 29.05.2026 · 38 (2) · 01-14
DOI: 10.52783/dxjb.v38.306 ↗Kurz gefasst
Fachartikel in der Zeitschrift Dandao Xuebao/Journal of Ballistics, online erschienen am 29.05.2026. Verfasst von M B Parjane.
Abstract (Originalsprache)
The purpose of this research work is to manufacture and characterize the aluminum metal matrix composite reinforced with titanium carbide(Tic) and silicon carbide(Sic) through centrifugal casting (CC) and powder metallurgy (PM) techniques. Advanced metal matrix composite materials is one of the potential and advanced category of industrial engineering materials. Composite material exhibits step by step transitions in the microstructure as well as reinforced composition in a specific direction increasing variable changes in the functional performance of a new element. The objective of the present research work is to fabricate, investigate and characterize combined Tic and Sic hybrid particles reinforced with commercial graded aluminum composite for brake pad applications. Centrifugal casting and powder metallurgy technique is applied for making functional performance graded hybrid composite. In CC consists reinforcing aluminum metal with small grits size of Tic and Sic silicon carbide through centrifugal casting were adopted to manufacture the experimental samples. The samples were further tested and analyzed for specific (mechanical) characteristics of composite materials. The results showed the movement of Tic and Sic particles towards the inner region in centrifugal cast. Centrifugal cast technique settle reinforced particles on periphery of element. The combination of these two materials and manufacturing methods (CC and PM) techniques creates a brake pad with improved Mechanical properties like compressive strength, hardness with less porosity compared to a standard aluminum alloy without reinforcements. As well as maintained density of hybrid composite materials.
Zitieren
APA
Parjane, M. B. (2026). Fabrication and Mechanical Characterization of Al-TiC and Al-SiC Hybrid Metal-Matrix Composites. Dandao Xuebao/Journal of Ballistics, 38(2), 01-14. https://doi.org/10.52783/dxjb.v38.306
Vancouver
Parjane MB. Fabrication and Mechanical Characterization of Al-TiC and Al-SiC Hybrid Metal-Matrix Composites. Dandao Xuebao/Journal of Ballistics. 2026;38(2):01-14. doi:10.52783/dxjb.v38.306
BibTeX
@article{Parjane2026,
author = {Parjane, M B},
title = {Fabrication and Mechanical Characterization of Al-TiC and Al-SiC Hybrid Metal-Matrix Composites},
journal = {Dandao Xuebao/Journal of Ballistics},
year = {2026},
volume = {38},
number = {2},
pages = {01--14},
doi = {10.52783/dxjb.v38.306}
}
EUVIMED