Statistical Modeling and Optimization of Pulsed GTAW Process Parameters for Enhancing Tensile Strength of AA7075-T6 Aluminium Alloy Weldments
Boletim da Sociedade Paranaense de Matemática · 13.10.2026 · 44 (12) · 1-16
DOI: 10.5269/bspm.84950 ↗Kurz gefasst
Fachartikel in der Zeitschrift Boletim da Sociedade Paranaense de Matemática, online erschienen am 13.10.2026. Verfasst von K. S. Pujari und 1 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A mathematical model was developed to predict the tensile strength of pulsed Gas Tungsten Arc Welded (GTAW) joints of AA7075-T6 aluminium alloy. The model incorporates key process parameters, namely peak current (Ip), base current (Ib), welding speed (S), and pulse-on time (Pon). All experiments were designed using a four factor, four levels Central Composite Design (CCD) matrix. In this study, welding was performed by preplacing the filler wire into the weld groove, a method found to significantly influence joint quality. Optimization of the GTAW process parameters using this approach resulted in notable improvements in the tensile properties of the welded joints. The empirical model was developed at a 95\% confidence level and subsequently evaluated for adequacy using statistical tools such as ANOVA and regression diagnostics. The results confirmed that the model is statistically significant and reliable. Consequently, the validated model can serve as an effective tool for predicting the tensile strength of AA7075-T6 aluminium alloy weldments under varying process conditions in industrial applications. The findings further indicate that welding speed has the most significant influence on tensile strength, followed by peak current (Ip), pulse-on time(Pon), and base current (Ib), particularly when the filler wire is preplaced in the weld groove prior to welding.
Zitieren
APA
Pujari, K. S., & Mewundi, G. (2026). Statistical Modeling and Optimization of Pulsed GTAW Process Parameters for Enhancing Tensile Strength of AA7075-T6 Aluminium Alloy Weldments. Boletim da Sociedade Paranaense de Matemática, 44(12), 1-16. https://doi.org/10.5269/bspm.84950
Vancouver
Pujari KS, Mewundi G. Statistical Modeling and Optimization of Pulsed GTAW Process Parameters for Enhancing Tensile Strength of AA7075-T6 Aluminium Alloy Weldments. Boletim da Sociedade Paranaense de Matemática. 2026;44(12):1-16. doi:10.5269/bspm.84950
BibTeX
@article{Pujari2026,
author = {Pujari, K. S. and Mewundi, Gurunath},
title = {Statistical Modeling and Optimization of Pulsed GTAW Process Parameters for Enhancing Tensile Strength of AA7075-T6 Aluminium Alloy Weldments},
journal = {Boletim da Sociedade Paranaense de Matemática},
year = {2026},
volume = {44},
number = {12},
pages = {1--16},
doi = {10.5269/bspm.84950}
}
EUVIMED